I already have it, it was difficult for me but I found it by reviewing the wire parameters one by one. Also I don't speak English. Thank goodness the names were clear. Thank you

I need to know the name or the numeric value of the red colors options in the wire contour options. I have search in the post documentation but I didn't find it. Does anybody help me?. Thanks

Is possible with the free version of Visual Studio?

Or do you need a specific version?

I want to learn to do that type of scripts, Do you have any information to read about?. I searched but I didn`t find nothing about that.

I program in Visual Studio with Visual Basic .Net

I think it is really good option to customize the program

Good Job

The error is for because a string value is out of the list. 

I had some similar error and it was the problem.

You must find wich one, but I would start for sgcode and sgabsinc

Or some misc value can be too

Good Luck.

Thanks, I wiil try if can I use for my problem.

Thanks

Hello to all. I know that wire is not the most used.

I need the next thread point, but I have a problem, If I have only a chain in the current operation when with opinfo (14008 and 14009) I get the new point all is correct, is the new point.

But the problem is when I have some chains in the same operation, If I get the next point It returns the next point for the next operation too.

I need the next point if it is a new chain in the current operation or if it is a new chain  in a new operation. 

I hope you understand me, sorry fot my bad english

3 hours ago, HectorAtMastercam said:

Yes. We have recently developed a Uniqua Json post processor. It is fairly new, so we are asking people to be careful when testing. I have contacted your Reseller and they will be sharing the post processor with you soon!

I have already the post, but it doesn't work well, I don't know if we have a configuration problem in Mastercam, but the machine doesn´t load it.

Who do Have I to contact, you or my reseller?  

Thanks.

27 minutes ago, HectorAtMastercam said:

Yes. We have recently developed a Uniqua Json post processor. It is fairly new, so we are asking people to be careful when testing. I have contacted your Reseller and they will be sharing the post processor with you soon!

Thank you very much.

16 hours ago, HectorAtMastercam said:

Hello Eltklas!

Unfortunately, some of these wire posts are complex. As you noted, it is not just the classic .pst file that creates the finished file, there are a couple of things working in the background to interrogate a dataset containing GFMS' technology data and merging/creating the final MJB file. It is not possible to debug the area that runs the data queries.

Would you perhaps be looking for a Uniqua post for GFMS? The file format is JSON and not MJB.

It's ok, we use uniqua system, and the jobs files are JSON, but we are try to use the older file MJB of the C550 while get the correct post.

Is there any post to uniqua in JSON?

Thanks

19 minutes ago, Colin Gilchrist said:

You should be able to talk with In-House or Postability directly, and the Reseller should work with them to sell you a working Post.

I know your Post is a Wire Post.

In-House Solutions has built hundreds of thousands of Post Processors for Mastercam. I'm sure they can get one working for your specific machine.

@Webby, can you please ask Alex Dales, if he can chime in on this? He is looking to source a Post for a Agiecharmilles CUT P550 Pro.

Thank you for your attention. 

But something about this topic?. any help for to work with external files and debug them?

Thanks again.

1 hour ago, Colin Gilchrist said:

In-House Solutions:

[email protected]

Postability:

[email protected]

Both of these companies are authorized 3rd Party Post Developers, and will sell you a Post for your machine, through your Mastercam Reseller.

There are Posts available, you just have to go to the right source (and pay for them), to get a working solution.

 

 I have yet paid for the post, but all that they send doesn't work. 

Thanks for the information. I feedback it.

Can I talk with In-House or Postability directly?. I think my reseller doesn't want to solve my problems. 

The post is for WIRE.

Thanks

I don't understand how mastercam reseller system work. Before to buy the new machine we asked to our reseller if is there a post that works well in the new machine. Agiecharmilles CUT P550 Pro. The said yes, then we bought it. But at the end they didn't have. The reseller send us all posts of the tech exchange that have similar name (encrypted of course) but no one works well. 

We know that in other countries (we are in Spain) there are post of mastercam working well we our new machine, but they can't ask for one to other reseller.

We can't ask to other reseller then we are thinking to change cam to Fikus. They have a full operative post.

I am so sad for it, i am using mastercam for 25 years, we actualize to 2023 version, but all for nothing.

  I am searching the way to do by me self, but the file is a XML file and it is new for me.

Thanks to all

Good morning.

I'm trying to modify the generic post GMFS C350 for wire, obtained from the Tech Exchange for 2023 version, but there is a problem that it uses an EXT file and another LCC file and then merges them into the final file.
The problem is that the debugger only shows the lines starting at 109, and I don't know how to debug the previous lines.
I send a zip2go in case you need it.

Thanks and best regards

030087_A_DOS PIEZAS_550.MCAM-CONTENT

Thank you, Works well.

But I thought that in the new versions from 2017 we would not have to use that old way since they added opinfo and the parameter tables. 

Thankks for your quick response.

I tried with rpar(sm_offset,2) and other positions and always, return 0.

I am really lost.

Thanks.

Hi to all, I need to select parts of a string.

That value is from a parameter table:

20200   sm_offset  --> 0. 0.238 0 0.125 0.113 1 1

The result is a string and I need separate the different numbers to others variables, is the same string or numeric.

I have tried the string select functions but no results for me.

Is possible to program an script or vbs or something similar?

Thanks.

In a few days I will use 2023 version, but someone tell me that I can't to migrate the mcam files with the migration utility becvause the X9 isn't in the list, only 2020, 2021 and 2022.

How can I migrate al files together ?. 

Thanks.

sorry for my English

I`m looking information to create a "Tech" file for my new Wire EDM machine, but I don't find any information about that topic in the post documentation. Is there info in other site?

I'm using now X9 and the reseller wants 9.000$ for actualize and the new post.

I think it's too expensive and I will try to do for my self.

Thanks to all for your help.

PD:Sorry for my English

Yes, I know that solution. Thanks.

But if it is possible I should find a way to do that in the post. 

If there are some different names it generates some files NC. 

Really it is not a problem, just curiosity. Thanks

Hi to all, Sorry for my english.

Is there any way to know if all operation have the same name?. When one or some operations have diferent name, it generate some NC files.

The parameter 15107 is the NCI Output Destination File Name, but if I try to read in pwwrt$ is the same, some diferents files.

I want to make some code to exit post and show that not all operatios have the same name.

When do I have to read de opinfo value?

Thanks to all.

It keeps going wrong. I tried using the construction plane matrix cm1$-cm9$ but I cannot understand how it works. In the documentation he explains the variables but not how they work. Thank you for the effort.

Sorry for the delay in responding, but it doesn't work either. I have tried with:

tox$ -y -z

tox4$ - y -z

t_orgin_x$ - y - z

corgx$ - y - z

But none of those variables store the coordinates of the construction plane within a multi-axis operation. Sometimes the values coincide and sometimes they don't, and other times they appear but with changed signs.

Any help will be welcome. Thank you

Hello, in my company we are interested in buying an edm charmilles cut p pro machine. I would like to know if you have a manual or could you pass me some information about the NC code used by the machine, or some examples of machining. It is to know if the charmilles post we have could be converted to that machine.