Is it possible to set  mastercam verify in the way when tool simulates from  the top plane and part  is rotates as in real life  for VMC with 4 axis rotary?

  (not in the way when part start jump as a rabbit around  the  tool )

     thank you

We do  pieces  20 inch   max  so far

   I just asking if there is   machine build for this kind of work and materials  . I mean with vacuum or spatial filter for coolant   . 

Graphite machine  has so much RPM which definitely don't need  for G10  

  Hi everybody ,

 What machine you can advise  for cutting materials as G10 ?

 As example we have graphite machines as Okada , but they too weak to cut G10 big  enough parts . 

  Ok

 Thank you

 I will try  to set this way

unfortunately I almost don't have free "Call" parameters    places (g or M).

I am using  .ssb  programs  for the different  probing cycles

 They  are limited there is only 10 places  for  g call and 10 for  M calls .

 Can you  guys  post  an example of engraving  code as  using     .ssb   file  ?

 thank you in advance .    

 anyone use  .ssb  or .lib for that reason?

hello mr. M,

 I would like to put macro (*********.msb file)  for engraving in the  msb  directory (by instruction for the macro) 

how possible  to open this directory ?

  Hello

Can anyone explain ,please , what is it   ********.msb directory and files  for okuma  p200  control?

So far  I Hate this interface , sorry  creators

  Way I work- I am typing by left hand  ,right hand on mouse .

  So   I am  minimum using  the  top menu .  People like me  suppose to memorise new letter combinations  for the command  and  it seem to me not  as convenience  as use to be . 

 Hello ,

 Is it possible switch off output of "G30 P1" (reference point)  command in Code ?

  Thank you so much  for you help

Finally just got full functional  rotary  for my Okuma - Genos -560 m

   If rotary on right  (tool changer on  left ) , chuck face to tool changer ,

  how I suppose to configure Machine Components Manager-Rotary Axis ?

 X+ must  be in red   or  X- ? (Sorry for  such of primitive  explanation)

 By default X+ red  now

  Thank you in advance

  Hi Everybody ,

 We just got new used Okada graphite machine with Fanuc 160im (windows base)  control  

   and have  some issue  with it .

when we use pulse handle   (on   x100   on manual mode) z axis still keep moving  up or down  about 0.5 inch after  we stopped rotation .

   What parameters we must change  to illuminate this  issue

  I am tried  to play with  parameter #7100  didn't work .

thank you in advance

Is it works for  the older controls   with  Ethernet   connection ?

 Or  if code loaded in "md1: " drive only

  Anyone using air spindle on Okuma  Genos ?

 How do you physically   setting it up ?

    Picture will be great

Thank you

Got it !

 Thank you so much

  Hi everybody ,

  Another question to Okuma gurus .

 Long time ago , when I ran OSP 5000  or so  I was be able to create blank material  block . 

    On  my new control  osp -p200 ma can't find  this option (soft key ).

 Can you guys direct me ?  I can't find  in the manual  (special function )  instruction for it .

 Thank you

^{Hi everybody}

 ^{Looks like problem solved . I don't know exactly , what happened but I just deleted program  from control and  loaded new one}  

  Hi ,

Okuma  Gurus  , please help.

 Running to the stupid problem .

  For some reason  control stop 's load programs from  md1:  drive .

 Getting alarm : Error 5202 no main program name 1

  Completely stuck  

 Thank you in Advance

is mill- turn will be included ?

 So is it possible to run Mastercam X9 and MC4SW on same computer?

  ^{thank you  Rob}

Hello everyone ,

 Just  found  mastercam x9  pc1 file saving process  go  for so long .

Same file in x8 saving much faster .

  Anyone notice this issue ?

Is it fixable ?

  Thank you  in advance

thank you