Brendan O' Regan
-
Posts
81 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Brendan O' Regan
-
Looking for a wire post (Fanuc 180is-w)
Brendan O' Regan replied to KTMDAVE's topic in Industrial Forum
I have a post for a Fanuc Alpha 1C wire eroder that i could email you if that is ok with the webmaster. Regards, Brendan -
Hi Mark, Welcome to the forum. Even though we are not in the UK in are across the water in Ireland. We manufacture Moulds,Press Tools, Tooling etc. We have MasterCam Wire, Mill level 3 and Design. This forum is great and you will find it very helpfull to you. I am not an expert on MasterCam but there are a load of people who are and give up there time to help you as much as they can. I have learnt a lot from this forum ------- Brendan [ 10-30-2002, 12:03 PM: Message edited by: ruffmut ]
-
Click on the following link and go to page 6. this page has all the guide lines for milling, drilling and turning. It also recomends grade of insert for cutting. Vanadis 4 spec sheet Brendan. [ 10-18-2002, 01:27 PM: Message edited by: ruffmut ]
-
Flats appearing on circular cavity
Brendan O' Regan replied to Brendan O' Regan's topic in Industrial Forum
Thanks CadCam. I tightened up the tolerance and it worked fine. -
Hi there. I am milling a circular cavity. I used surface finish countour but it left my wall with flats all the way around. It seams that it took my surface and broke it into points and milled point to point. The cut tolerance was .025mm. If i reduce this value will it mill my wall a true circle. Thanks for any help
-
I have a file uploaded a few week ago on to CADCAM's FTP for calculating speeds and feeds. Its in the unspecified folder and the file name is milling cutters speeds and feeds. It is an excel file. Hope this helps you, Brendan [ 09-16-2002, 12:17 PM: Message edited by: ruffmut ]
-
This is from the FAQ page quote: The privilege of having a custom Avatar is granted at 200 posts. You may send in your max 96 x 96 pixel image to the Webmaster, along with company name and SIM number to validate your status as a licensed user.Regards, Brendan [ 09-12-2002, 03:25 AM: Message edited by: ruffmut ]
-
I have uploaded a file to Cadcams FTP. It is in the unspecified_uploads folder. Cadcams ftp unspecified folder The file is an excel file and called milling cutters speeds and feeds. I use this as a starting point and have no problems with it. Hope this helps. Brendan. [ 09-03-2002, 07:56 AM: Message edited by: ruffmut ]
-
Good Luck Duckman and come back to visit the forum soon. Like wise here i find the forum very helpfull and learn some nice tricks here
-
Greg. Can you please put the doc file on the FTP please so that i can take a look also. Thanks
-
Happy 4th of July to you all in the US. Have a good day off and think of us who have to still work.
-
You need your access code, then do the following. 1 Run the Hasp80 Utility. 2 Enter the access code in the update field. Include the dash if present. 3 Click update
-
If anyone has one can they email me a copy also. Thanks.
-
Any chance that you can upload the file as .mc8 please. Thanks in advance.
-
Your lucky to get a mouse pad !!!. I did'nt get one when we got our first seat of MasterCam V8 mill level 3 and wire
-
Jay. I have no problems with FTP. Been in today and I am using Explorer 6
-
The Drawing I have was created on CAD but seems to have gone missing and is not available on CAD any more
-
I need to machine a cam from a drawing. Is there any c-hook or software compatible with mastercam to create it. I have been given a number of points but i cannot use a spline as i have been told this will not be accurate enough. Thanks in advance.
-
We are closing on friday afternoon for two weeks. so it will be a nice break, away from the pressure of work. Have a Happy Christmas and all the best for the New Year !!
-
Dave. Good web site for some effects on web pages!!
-
No. Over here in Ireland business is still very bad. Any industry in Computers, electronics and mobile phones is suffering. My biggest customer have just announced thst they are pulling out of the country and are sending their equipment to the far east. This is 60-70% of my business gone. Fingers crossed that this will all change in the next few months but i can't see this happening till the start of next year at least.
-
chris I noticed the same problem. Everything was ok until i changed from rectangle stock to round. When i changed back the stock size in verify is far too big. I thought it was just me so maybe there is a bug.
-
Robert. Go to the following link Cadcam's ftp and download shark.zip
-
Keith. Wrong team. I support Jordan as they are Irish despite not doing well this season. Hopefully next year. I shall think of you when i am there sitting at Au Rouge hoping that Ferrari will crash out. [ 08-03-2001: Message edited by: ruffmut ]
-
I was supposed to have been off last week and this week, but had to cancel them to finish a project. They were cancelled by my boss who was on holidays himself in spain. So i am now looking forward to my holidays in september where i am going to the Belgium Grand Prix for a week. [ 08-03-2001: Message edited by: ruffmut ]