Actually, the only time that we can get a word in edgewise is when Keebler falls asleep at the computer.

Huzway C, The Iowa boys are always willing to lend a helping hand.

Try Create-Curve-All edges

You might want to download the trial version of the setup sheet John mentioned. Like a lot of things, a good setup sheet will pay for itself over and over.

Are you sure that option is enabled on your HASP?

See if this helps Linky

Whew! That was close.

HOW DO YOU MAKE IT STOP!!!

I don't know what the big deal is, I thought elves were color blind anyway. Those cookies never look anything like the picture on the box.

Sounds like an enhancement request to me.

John, I don't know of a way to do that in Mastercam.

Try this poem, it may help. I love my job, I love the pay! I love it more and more each day. I love my boss, he is the best! I love his boss and all the rest. I love my office and its location, I hate to have to go on vacation. I love my furniture, drab and gray, And piles of paper that grow each day! I think my job is really swell, There's nothing else I love so well. I love to work among my peers, I love their leers, and jeers, and sneers. I love my computer and its software; I hug it often though it won't care. I love each program and every file. I'd love them more if they worked a while. I'm happy to be here. I am. I am. I'm the happiest slave of the Firm, I am. I love this work, I love these chores. I love the meetings with deadly bores. I love my job - I'll say it again - I even love those friendly men. Those friendly men who've come today, In clean white coats to take me away!

I just tried V8, with no luck. Pete Rimkus, Is there a way to do this?

KenD, Are you looking for a 3-D wireframe?

Hardmill, What did you find in ruger2's file?

ruger2, You say that the file was written in wireframe. Do you mean there were surfaces, but no solid?

11min 10sec 2.8 GHz CPU

Did you try calling your Mastercam Reseller? By the way, welcome to the Forum!

Mater, No not cornfields silly, University of Iowa Sports! Go Hawks!

quote: Fine, you wont hear from me again.Boy, you guys did it this time. I won't blame Keebler if he kicked you all in the shins. He's probably wandering aimlessly in Iowa looking for the true meaning of life.

John, The press release talked about record sales of Mastercam, it didn't say what their profits were.

Hi Little John, Yes, once again the company has taken on more work than we can handle. And then there are tractors to repair, fields to plow, corn to plant, etc. You know how it is.

Your swag will be the satisfaction of knowing you have made a significant contribution in helping Mastercam become the #1 CAM software package for the last 13 years. Hey, if it wasn't for Mastercam we wouldn't have this Forum, and then we would actually have to do some work.

Press Release Submitted By CNC Software: CNC Software, developer of Mastercam CAD/CAM software, announces that Mastercam sales for the 1st Quarter 2007 have been the highest in the history of the company (23 years). New Mastercam seats, customers updating to the current release, and Mastercam's Maintenance program have all contributed to the company’s record quarter. CNC Software also reports that sales for 11 out of the past 12 months have beaten the previous sales records set for each month since the company started in 1984. "The sales trend that we are experiencing shows that Mastercam customers, new and old, are not only taking advantage of the many enhancements that we have offered over the past 2 years, but are also profiting because of them," says Steve Bertrand, Director of Corporate Sales. "In addition to new seats sold, we are experiencing an increase in orders for additional seats of Mastercam from existing customers, which is a true testament to this fact." Mastercam X originally released in August of 2005, was redesigned to reduce programmer interaction and increase machining flexibility. This release, along with the introduction of the Mastercam Maintenance program, the delivery of Mastercam X2, and recently X2 MR1, have resulted in a record year in 2006 as well as the record 1st Quarter 2007. Says CNC Software President, Mark Summers, "As in the past, we will use our success to reinvest in the company, in Mastercam, and in the success of our users." Congratulations CNC Software!

We have Design LT X2, but I don't know if they will update it with the MR1 enhancments.