petro7
-
Posts
171 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by petro7
-
Should read chuck not check
-
Thanks Guys Unfortunatly no vacuum check,only one part to do. Just going to get the cutters and give it a try. I will also use the tape. Thanks again
-
Clamping the edges and also in the center. A 4" center hole will be milled later.
-
Thanks John I,m still sane.
-
Does anybody know of a hss endmill that pushes thin material down onto the table instead of lifting it up while it is cutting.I thought there was a cutter to do this, but maybe i am just losing my mind. Material is 1/16 alum. With a pocket .04 deep.
-
thanks guys
-
Is anybody out there using a Eumach bed type mill? If so could you give me your thoughts on the quality and performance of this machine. Thanks
-
could someone help me set my hurco post to post subprograms.I use tansform to machine on three different vises.but when i post there are no subs so it just stays on vise #1.it will post the operation 3 times but there is no option to change locations.
-
Thanks guys: I got it,I just played around in tranform and got it to do what I wanted.just like jmparis explained. Thanks again
-
John Could you tell how to do this.When I use transform it completes the first part,then goes to the second part and completes that one.I am just trying to cut down on tool changes. thanks Shawn
-
I have a simple question,if I setup up 2 or 3 vises on a hurco vm1 and want to machine the same part on each vise,but want to face each part with tool 1 then change tools and machine each part with that tool,and so on.do I need a post that supports that or can I do that with transform.
-
Thanks Bullines: I will take a look at these options and make a decision.
-
We tried dell today they discontinued nvidia,on their laptops.ATI is the only card available.
-
We tried dell today they discontinued nvidia,on their laptops.ATI is the only card available.
-
We are looking to purchase a new computer system to run Mastercam exclusively and the only computers that I have been able to find have the Radeon ATI video card. Has anyone had trouble running Mastercam with this video card on a Notebook computer? I have been advised that the NVidea is the way to go. - Any comments or suggestions would be appreciated? Thanks
-
Jimmy i am using cimco edit to send the program. I checked to make sure the parity is the same as the machine and they match.I just don't know why i can recieve and not send.
-
I am trying to send programs to a VDF lathe and I keep getting parity errors. I can receive programs from the lathe to computer but cannot send back. The control is a Siemens Sinumerik Control. Does anyone know of any solutions to this problem?
-
Craig: I'am using nvidia video card.I had the acceleration turned all the way down,I turned it up and will try that. Thanks Shawn
-
Yes i have all the latest xp updates. thanks
-
I was wondering if anyone knows of any patches to fix this problem that I am having with MC9. I am running Windows XP and since I have installed it I have had nothing but problems with Mastercam - we have changed the graphics from an ATI but the problem is still happening. When I leave the computer for a few minutes it freezes up and I have to reboot - thereby loosing all my information. Has anyone got any solutions to this problem? Thanks