Slider in Verify

[So not a Guru]

I noticed there is a new slider control, in the lower left corner of the Verify window (2019). The popup tip says it's to zoom in & out of the timeline. I've played with it a bit, but it doesn't seem to do anything.

Anyone know how it's supposed to work?

[JParis]

All it does is expand the verify timeline..."makes it easy to see quick tools that might get lost in many operations"

Basically useless

[SSS824]

I would like to know how you can get the graphics to go a normal speed instead of either painfully slow or faster then you can blink.  I see verify in other programs simulating how they actually look machining running smoothly..my verify is 0 to 100..

[jeff]

4 minutes ago, SSS824 said:

I would like to know how you can get the graphics to go a normal speed instead of either painfully slow or faster then you can blink.  I see verify in other programs simulating how they actually look machining running smoothly..my verify is 0 to 100..

The machine simulation has much better control over speed than verify.

I've found verify to be spotty... meaning if I am just verifying 1 toolpath,it is hitchy and seems to be dog slow. But if I have 4 more toolpaths after that one, then it's "normal" speed.

Also restarting Mastercam seems to help at times.

[crazy^millman]

1 hour ago, jeff said:

Also restarting Mastercam seems to help at times.

10-20 times a day sometimes.

[SSS824]

15 hours ago, 5th Axis CGI said:

10-20 times a day sometimes.

That is ridiculous that you would need to...Mastercam is good software if they would nail down all the known issues other then pumping out more bugs.  The graphics are choppy as well, but I guess if you want good verify get vericut etc...