solid chain selection

[neurosis]

2 hours ago, AHarrison1 said:

Yep, like the triple middle mouse click to exit anything... or having to have a 3 button mouse.

 

I used one of these things for so long it took me forever to get used to a mouse with a wheel on it. 

 

And yes, the mouse button combination menus were about as efficient as you can get on a cad/cam system.  I could blast through the menus so fast that you couldn't even see what they were.

 

[gcode]

Yes.. my fist Cad/Cam system that used a  mouse was TekSoft... and a middle mouse button was mandatory

 

[crazy^millman]

1 hour ago, gcode said:

Yes.. my fist Cad/Cam system that used a  mouse was TekSoft... and a middle mouse button was mandatory

 

30 years since I touched Tecksoft

[gcode]

11 hours ago, crazy^millman said:

30 years since I touched Tecksoft

TekSoft became Procad 97 and that was the end for me

The coding for Procad 97 was done offshore and it was a complete mess.

Zero byte crashes were frequent, to the point it was difficult to get any work done.

I purchased Mastercam V7 in late 1997

 

[byte]

On 5/4/2023 at 7:14 AM, gcode said:

TekSoft became Procad 97 and that was the end for me

The coding for Procad 97 was done offshore and it was a complete mess.

Zero byte crashes were frequent, to the point it was difficult to get any work done.

I purchased Mastercam V7 in late 1997

 

Zero byte?

Don't like the sound fo that..