Disassemble solid

[mirek1017]

Hello All 

can I use this function or other one if I has all solid body ,I want to split this solid for 3 elements  

 

 

[JParis]

If that is a single solid, the Disassemble function will not work....it is designed for assemblies which are made up of multiple parts.

You will have to break it apart manually. 

[Aaron Eberhard]

No, not of it they're all part of the same solid.  

Disassemble is actually part of the "layout" tools, it's meant to take an assembly and split up the component pieces and lay them out on a nice flat plane. 

If they're all the same solid (looks like it from here?), you'll need to make a few copies of it, then chop off what you don't want either using Model Prep tools such as Modify Feature, or just Solids Extrude type cutting.

 

Edit:  Beaten by Paris.... AGAIN!

[AMCNitro]

You can use solid trim, one line at a time.

[Fred @ Slate Industries]

When trimming un check make planes associative ( ? )

Or every trim will create a new plane . Not the end of the world but your planes panel will get crowded