how to use canned text option ?

[mig]

Hi All!

I would like to ask to somebody who have experience to use canned text option to share information about it.

I would like to put some text in between operations.

Thank you an advance.

Have you good weekend.

[crazy^millman]

Well do a search about can text a really good exmaple was done about a month ago and gave soem good buffer examples and other thing to do a great job with Cantext descriptions.

 

HTH

[Thad]

Would "manual entry" do what you want? Here is a link to the thread that got me started on it. Do a search for manual entry. There is lots of info in the archives on that.

 

Thad

[mig]

Thank you guys for replay!

I will try to use information you gave me .

[crazy^millman]

If you do not get it to you liking post up some sample code of what you are getting and what you want it ot look like code and we will try to help you from there. The question you asked was of a general nature was the reason I think we both pointed you in the direction of the search verse a well yes some do but how does that really help you if I am making sense.

 

 

HTH

[mig]

i would like to be able to put some text or comand inside of g-code , lke M0 or G15H2 between oparations.

[crazy^millman]

In what places do you want them to be in the start of toolchanges after the tool before the tool or after every operation or at the end of each operation or at the end of each toolchange. Put up some sample code of what you want and what you are getting using the can-text and then we can help you some more you question is kind of vauge thus noone know what to tell you. The M0 is there already so not sure what you mean there have you tried using the can-text there and if you have what were the results?

 

HTH