Post breakdowns

[Threept82]

Is there anywhere that sells or has detailed

breakdowns of milling post for Fanuc controls?

I would like to arrange my hardcopies a certain way.

[robk]

Check with your MasterCam reseller for a post CD. For a small fee, it's an awesome tool. By looking where you're from it might be S4A. Those guys are great, and they'll go the extra mile to help you.

[Threept82]

Thanks. It is and thy are.

[Threept82]

They

[chris m]

3.82

 

RobK is right; the Post CD and the 1997 Reference Book are both sweet resources for this.

 

Call Karen at S4A (978)728-0009 and she'll tell you what they have available for you

 

If you like, post up some code the way you like it and we could at least get you started

 

C

[Threept82]

I will call her and thanks.

 

%

O3291------------ ALL SET WITH THIS

(03/03/04)------------ ALL SET WITH THIS

(T/N3291 T/REV=)------------ ALL SET WITH THIS

(COMPANY NAME, PART NUMBER) ???

(P.,REV-A) ???

(OP.40 REV.N/C)???

()

(T1,H1,D21) ???

()

G55------------ ALL SET WITH THIS

G17G40G80G90

 

N100T1M6 ???

(SEQ NUMBER TO MATCH TOOL-FOR OPERATOR CALL UP)

 

G0X0Y0S4500M3T2

 

CUTTING INSTRUCTIONS

 

G0Z2.

G40M9

G91G28Z0M5

M19

G0G80G90M1

()

(T2,H2,D22)

()

N200G17G90M6

G0G90X0Y0S4500M3T2

 

 

CUTTING INSTRUCTIONS

 

G0Z2.

G40M9

G91G28Z0M5

G91G28Y0M19

G90M6

(FILE-NAME=3291) ------------ ALL SET WITH THIS

M30

%

[gcode]

There is a new post CD out current to V9.1.

[crazy^millman]

Go back and do a search on NC-COMMENTS and see what results you get. Alot of what you have there goes along with this.

 

Welcome to The Forum and HTH