print out

[Marty A]

morning everyone

 

i have a stupid question. when i go in my

ops manager your box comes up and then i

go in my parameters. ok how do i go about

printing this out,for the life of me i

can't remember how to do it.i hope this

is enough info. thanks in advance and

have a good day all

 

 

marty

[Threept82]

From main menu

NC utilitys, setup sheet

[Marty A]

thanks Threept82 for your quick reply

what i am looking for is printing out

the box that comes up in your ops

manager.again i hope i'm getting this

right.thanks again

 

marty

[Jody]

get PrintKey it uses the print screen button like it should be used. http://www.geocities.com/~gigaman/

it will print a picture of the window that is open or the whole screen. nice to have for printing after you verify a part, you can swap the color black with a ba$tard and not waste your black ink.

 

Jody

[Marty A]

thanks Jody i'll give that a try.

 

 

marty

[Thad]

Marty,

 

Do you want a screen shot of a parameters page for a particular operation? Matt can show you how to do it. Unless you don't want to ask him.

 

BTW, how have you been? Are you guys busy? We're swamped and we just got another hot job in. We're working 12 hours and they're asking about working Sunday. Looks like next week will be Good Friday off and then back to work on Sat.

 

See ya, bud.

 

Thad

[Marty A]

hey thad yep thats what i want. i guess

i'll ask matt. things are a little slow now

it's gonna get real busy here real soon tho.

been doing ok just waiting for fishing to start

talk to ya later

 

marty

[Threept82]

Marty A

If you find out what to do please post how. If I'm correct you would like to print all the operation and not just the screen because if you have more then 9 or 10 ops you can't print them all with print screen.

[Marty A]

ok Threept82

i figured it out. i hit alt/print screen then paste it in paint, then you can print it out.

i'm doing this because when i try something new

i would right any changes i made on paper. this

makes it much easier. you probably already new

this. me it takes me a while to catch on.

 

marty

[Threept82]

You should'nt need the alt part.

Print screen alone will do the same thing.

[Marty A]

Threept82

 

just tried it that way,yep no alt.

thanks bud

 

marty

[Thad]

Maybe you meant Alt-Shift-Print Scrn. That will give you just the active window, which will save you from cropping the part out that you don't want after you've pasted it into your photo editor. This was recently mentioned in another thread.

 

Thad