Inhouse Solutions - Kudos

[Mick]

I'd like to take this opportunity to thank Inhouse Solutions for providing me with help on a few post issues over the past few months.

 

Brett Thomas, and Dave Thomson deserve a really good pat on the back for providing fantastic service, and also doing so in a really friendly manner. It is guys like this that make working with Mastercam so enjoyable

 

On top of this, they provide this forum, and also provide the MPMaster range of posts, which I REALLY enjoy using.

 

If anybody here needs any post processors, or post processor work done, I highly recommend them.

 

I'm a big believer in giving praise where praise is due, and its certainly due in this case.

[Rekd™]

x2!

[BernieT]

[GVM]

I'd like to chime in and give a big high five to Brett Thomas. Every issue I had with my post he responded with "no problem, should take a few minutes". I owe him my next child.

[Lee.]

I also have had very good help from INHOUSE especially Dave.

 

Thanks again guys.

 

All the best.

[Tim Aydt Prototek Engineering]

Both those guys are top notch. You gotta keep an eye on Brett at the cash machines though!

 

[chris m]

F__k them...

 

Just kidding; things are just too positive in this thread

 

C

[Storkman]

Chris, I see that response in a lot of threads lately. Rough week bud?

[JazzBass]

[Post dept]

Nice one Tim!

 

Those foreign cash machines can be pretty tricky to operate.

[Aaron AKA. Zippy]

These guys are cool!! I am yet to spend a dime with them but they always chime in on my post questions without a blink. I will be contacting them to buy a 5ax post as soon as we get our trunion. Thanks to all.

 

 

Aaron

[Brendan P]

I have not had the chance to deal or talk to Brett,but as far as Dave goes....

Well he is just a 'Swell Guy'.. wink/wink

 

Chris,you need some help!!

(I'm still laughing) you're bad man....