Service pack update 3 is available

[Müřlıń®]

I have never got the update manager to work yet.

 

Where are you guys finding update003?

 

Is there a link?

[Slepydremr]

Linky

 

This should be it.

[Steve Biehl - Cimquest Inc]

Direct link to Update 3.

 

 

 

http://updates.mastercam.com/x/sp1/service...1-update003.exe

[Slepydremr]

Haha, I beat you....

[Müřlıń®]

Danka

[Jim Evans from CNC Software]

The error message you are seeing was caused by a Typo on the update site.

 

Try checking updates again, this should be fixed.

[Slepydremr]

Yep it works now.

[MIKE_B]

Just a heads up on the update!!!!

Not sure what the problem is yet but.....everything was fine 1/2 hr ago before I did the update. Just posted the same toolpath using three different posts and 1 out of the three were fine....Do I need to update my posts again????

[Guest]

:popcorn:

 

[MIKE_B]

Good post!!

 

(PROGRAM NAME - GLT-03-102-10-300 TEST 120 THICK )

(DATE=MM-DD-YY - 12 - 02 - 05 )

N100 G20

N110 G0 G17 G40 G80 G90

( !3/8 SPOTDRILL ALUM TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - .375 )

N120 G0 G53 X10.

N130 G49 T1 M6

N140 G0 G90 G54 X-9. Y5.6 S2500 M3

N150 G43 H1 Z.1 M8

N160 G99 G81 Z-.185 R.1 F10.

N170 X-6.188 Y6.788

N180 X6.187

N190 X9. Y5.6

N200 X6.187 Y-5.587

N210 X-.688 Y-.087

N220 X-6.188 Y-5.587

N230 X-9. Y-5.5

N240 X-3.75 Y-9.25 Z-.11

N250 Y-9.75

N260 X3.75 Y-9.25

N270 Y-9.75

N280 G80

N290 M5

N300 M9

N310 G53 Z0.

N320 G53 X10.

N330 G05.1 Q0

N340 M02

 

 

Bad post!!!

 

N100 G0 G54 X-9. Y5.6

N110 Z.1

N120 G99 G81 Z-.185 R.1 F10.

N130 X-6.188 Y6.788

N140 X6.187

N150 X9. Y5.6

N160 X6.187 Y-5.587

N170 X-.688 Y-.087

N180 X-6.188 Y-5.587

N190 X-9. Y-5.5

N200 X-3.75 Y-9.25 Z-.11

N210 Y-9.75

N220 X3.75 Y-9.25

N230 Y-9.75

N240 G80

N250 G0 G17 G40 G80 G90

( !3/8 SPOTDRILL ALUM TOOL - 1 DIA. - .375 )

( LEN. - 1 DIA. OFF. - 1 )

N260 T1 M6

N270 G0 G90 G54 X3.75 Y-9.75 S2500 M3

N280 G43 H1 Z.1 M8

N290 M9

N300 M5

N310 G91 G28 Z0.

N320 G28 Y0.

N330 G90

N340 T1 M06

N350 M30

%

[dwsz71]

Are those posts off of an updated system and a non-updated system? Or different posts from a single updated system?

[MIKE_B]

Dave

 

All three different posts from single updated system

[?Mark]

quote:

---

Typo on the update site.

---

All is good now.

Thanks Jim.

Mark

[Lathe-Mill]

what is the name of the file that i should backup , just in case i want to go back to what i have right now?

thanx.

[dwsz71]

MIKE_B,

 

For s' & gs' I thought I would install it on my laptop for testing. And sure enough I found one too, Mike. LOL. This sucks out loud.

 

Out of three posts two posted correctly.

 

Samples for my Dynapath 1040 to follow.

 

PC with SP1 Update 1:

 

(JUNK2)

N0000(T)MISC$

N0001(T)JUNK$

N0002(T)REVISION 0$

N0003(T)OP. 1 COMMENT DIALOG$

N0004(9)M06E01T01$

N0005(9)M03S1069$

N0006(0)X0.5Y-1.5$

N0007(0)Z1.0$

N0008(0)X0.5Y-1.5Z-0.115F1.1G1W0.1O1.0$

N0009(0)Y-0.5$

N0010(0)X1.5Y-1.5$

N0011(0)Y-0.5$

N0012(0)G0$

N0013(T)OP. 2 COMMENT DIALOG$

N0014(9)M06E01T02$

N0015(9)M03S1069$

N0016(0)X0.5Y-1.5$

N0017(0)Z1.0$

N0018(0)X0.5Y-1.5Z-1.0002F4.3G3W0.1O1.0K0.1$

N0019(0)G0$

etc.

 

Laptop with SP1 Update 3:

(JUNK)

N0000(T)MISC

N0001(T)JUNK

N0002(T)REVISION 0

N0003(T)OP. 1 COMMENT DIALOG

N0004(9)M06E01T01

N0005(9)M03S1069

N0006(0)O1.0

N0007(0)X0.5Y-1.5Z-0.115F1.1G1W0.1O1.0

N0008(0)Y-0.5

N0009(0)X1.5Y-1.5

N0010(0)Y-0.5

N0011(0)G0

N0012(T)OP. 2 COMMENT DIALOG

N0013(9)M06E01T02

N0014(9)M03S1069

N0015(0)O1.0

N0016(0)X0.5Y-1.5Z-1.0002F4.3G3W0.1O1.0K0.1

N0017(0)G0

etc.

 

No EOB's ($) and the first positions are replaced by the Drill Cycles Initial height with no cycle call.

 

Cool!

[MIKE_B]

Thanks Dave

 

Thought it was just me. I'm sure its easily fixable with all of these post gurus here.

 

Where are they?????

[Paul Decelles]

Do me a favor and zip2go the offending files (along with their .pst, .control and .mmd files) so we can have a look. Email them to [email protected] and include a quick explanation of what is happening.

[Steve Biehl - Cimquest Inc]

Dave,

the Dynapath post from CNC for X seems to post correctly. I'll take a look at your post and get back to you.

[kathy]

Just loaded it up this morning. So far so good.

 

~Kathy

[Paul Decelles]

Mike_B's problem was a setting in his post, haven't received any files from Dave H. yet...

[Don S at Barefoot CNC South]

Just ran it 1628 failed to complete error, instal wouldn't close, couldn't shut pc down 3 times it finally went on the 4th try.

[dwsz71]

Sent it to Steve, Paul. If you want to take a look to I'll be more than happy to send 'em off to ya.

[Paul Decelles]

I'm sure Steve will call me if he can't figure it out (he's a pretty smart cookie).

[MIKE_B]

Thanks for the help Paul!

[PBpaul]

OK, say I install McamX from scratch and do the Service Pack One. Do I need to do the Number One update to Service Pack One before I do the Number Three update to Service Pack One and what happened to the Number Two update to Service Pack One? Or, does Three automatically do everything?

 

Thanks -PBPaul