V9 Hasp not found after SP1 update 3 installed

[Johnny]

What gives?

 

I still need to run V9

 

any help much appreciated

[Henk]

I had the same problem here.

Download "Drivers.zip" from here

 

disconnect your key and run the bat-file

[Johnny]

Thanks Henk, but downloaded installed and made no difference. I've restored the box back to a time before I updated X to SP1 3 and asked Dave Thompson for some help on this.

 

[Chris Flint Two Ft Pty Ltd]

Had exactly the same problem but just gave up X and placed it in the too hard basket until the New release full version comes out

chris f

QLD

[Johnny]

Hi Chris, Where are you? Brisbane??

 

Don't give up on X its worth the initial ag mate.

I'm sure theres an answer to this HASP drama. I don't really use 9 anymore just want it working in case I need it for an old job.

 

[El Scotthead]

Johnny,

 

I had the same problem--V9 didn't work even after I downloaded and installed the drivers. I'm not sure why, but I had to put the files (drivers.bat, haspdinst.exe, & hinstall.exe) directly into my Mcam9 folder. Otherwise, the install wouldn't work.

[Johnny]

quote:

---

had the same problem--V9 didn't work even after I downloaded and installed the drivers. I'm not sure why, but I had to put the files (drivers.bat, haspdinst.exe, & hinstall.exe) directly into my Mcam9 folder. Otherwise, the install wouldn't work.

---

Thanks but still no go. This is the message I get no matter what I do.

 

 

[?Mark]

Did you try to run hasp setup?

 

Mark

[Fred @ Slate Industries]

Take the Hasp out "run the Batch file" (The one with the Picture of the gear)

Turn off Your PC put the Hasp back on then start the PC.

 

Tony

[Steve Biehl - Cimquest Inc]

'failed to start a service...' ??? This is a NetHASP install? If so, is your V9 NHasp Utility set to NetHASP/Network?

[Johnny]

Mark, Tony

 

I ran HASP9 setup and the box was empty, no hasp code, no hasp found etc

 

I ran the drivers.bat file with hasp removed as per instructions. When I run the drivers.bat file I get the message in the screenshot above?

 

I might restore my XP back to an earlier date in case the Hasp driver has corrupted something in Windows.

 

Thanks for the input

[Johnny]

Steve, we're not using a Nethasp

[Johnny]

quote:

---

Take the Hasp out "run the Batch file" (The one with the Picture of the gear)

Turn off Your PC put the Hasp back on then start the PC. Tony

---

Tony, I restored my XP back to a time before I tried installing these drivers then followed your instructions and it now works fine.

 

Thanks for your input

 

[Thad]

quote:

---

I ran HASP9 setup and the box was empty, no hasp code, no hasp found etc

---

Johnny,

 

Just for future reference and for the benefit of others...you ran Hasp Utility, not Hasp Setup.

 

Hasp Utility will allow you to enter codes (Update, Maint, etc). Hasp Setup will install drivers. It looks just like any other install program.

 

Glad you got it working.

 

Thad

[Johnny]

Thanks Thad