The best post

[molson]

What is the bust post for a haas vf2 mill and a haas sl30

[Namliek_J@TheeCircle™]

MPMaster is probably what you are looking for.

[Namliek_J@TheeCircle™]

Although the best post is probably gonna be one that is tailored to your operation. it all depends on what you are looking for and how you want it to post. mpmaster like i mentioned above is a generic post that works for HAAS machines. You can edit the post to work the way you want it to, or have someone do that for you, but then you are looking to spend some bucks.

[molson]

when i try to load it to mastercamx it tell me that is a bad file name

[Namliek_J@TheeCircle™]

Not sure what you mean? Load what to Mastercam X from where? Need to be more precise.

[Tim Simmermon]

If you had V9, it came with a Haas post for mill and a Fanuc post for the lathe. Just use the C-Hook to update those to X and you should be set.

[Guest]

quote:

---

What is the bust post for a haas vf2 mill and a haas sl30

---

The ones you either purchase or modify beecause it does exactly waht you want it to do

[molson]

call me dumb but how do i do that i have v9 and runing mx

[Thad]

The MCX transition guide is a great place to start. It'll walk you through step by step.

 

Welcome to the forum!

 

Thad

[mayday]

looky here

[Post dept]

Molson,

 

Download mpmaster for version X and set the haas_drill to 1. It's on the emastercam posts page.

 

For the SL machine, have your dealer contact In-House and we'll hook you up with mplmaster.

 

Brett

[gcode]

an mplmaster?? an In-House lathe post??

I didn't know there was one. Cool

[Post dept]

We're working on it and should have it up on emastercam sometime soon.

[molson]

here is what i get (corrupt or invaild file)

[Nick_AFRL]

sweet mplmaster post would be cool, we are in the process of trying to purchase a new haas lathe to replace our quickturn that just died...