Why can't MC Make the Perfect Product?

[desmotom]

Can't seem to get my pictures in my topics and replies???

[Storkman]

Go to the full reply form and click on image, paste the url in the dialog box.

[desmotom]

What about the picture under my user name photobucket.com

[3rdstring]

code:

---

---

It has to be formatted as above, altho that pic is pretty big to use in a siggy.

 

HTH

[John13]

quote:

---

What about the picture under my user name

---

You need 200 posts to get an avatar.

[desmotom]

okay thanx

[Jim at Gentex]

quote:

---

You need 200 posts to get an avatar.

---

AAAAAAAAND...you need to be able to work and play well with others on the board!

 

j/k...you'll be just fine desmotom... as long as you don't pi$$ off the admins here...

 

Welcome and enjoy the forum.

[Storkman]

quote:

---

AAAAAAAAND...you need to be able to work and play well with others on the board!

---

I don't know Jim, some of us don't play well in the sandbox and still get by.

[desmotom]

I'll be needing a little advice once I get X

[Keith @ Solid Code Solutions]

OK! It sounds like a really good time for a beer.

[Keith @ Solid Code Solutions]

Hey Terry,

 

Doesn't a bit of sand need to be kicked from time to time?

[Keith @ Solid Code Solutions]

desmotom,

 

Is that a Seca650 i see?

 

[Hardmill]

quote:

---

Doesn't a bit of sand need to be kicked from time to time?

---

 

 

PEACE

[machtek]

This thread almost turned as nasty as a g-string on a fat girl. Glad to see a partial recovery.

 

[Keith @ Solid Code Solutions]

Thanks for the imagery.

 

[Storkman]

Ahhhh,, this was nuttin. Wait till election time. There will be so much sand kickin that the sandbox will be empty.

[machtek]

Thats why I try to remain politically inert. Too much like children when emotions get involved with posting.

[Hardmill]

quote:

---

There will be so much sand kickin that the sandbox will be empty.

---

:SMACK:

 

 

PEACE

[machtek]

Hardmill I think your emoticon thingy broke

[RandleXX]

Darn, I missed all the fun!!!!

 

Been too busy training on NX.

[Hardmill]

quote:

---

Darn, I missed all the fun!!!!

---

Not at all it just starting

 

 

PEACE

[Storkman]

Gees Randle, you couldn't figure out X, how you gonna figure out NX? That's like a whole nother letter.

[Hardmill]

quote:

---

That's like a whole nother letter.

---

[Jim at Gentex]

I knew Hardmill would come along sooner or later and kick some sand on teh Stork. I'm feeling the love in this thread!

 

Back to the original topic...

 

I started using Mastercam Version 4 in the early 1990's and I can say without a doubt that it has come a LOOOOOOOONG way since then!

 

Is Version X perfect?

Of course not. Software development doesn't work that way. Never has, never will. If you doubt what I say just look at Microsoft for example. They've had their share of 'issues' to say the least.

 

Is CNC Software headed in the right direction?

You bet, IMHO of course. The true Windows platform in Version X represents the first step toward the future. Software development is a PROCESS, not just a single project or series of projects. It's not hard to see the vision that CNC Software has with regard to the future, but there are no guarantees it will be a smooth ride getting there! The cycle of software development never really ends because there are always new challenges and obstacles to overcome. Even with its known flaws which are currently being addressed, Mastercam still gives the most bang for the buck IMO so I can put up with a few minor annoyances.

 

I know...you're probably thinking I'm just drinking the Kool-Aid and going along with the program, but I really do think based upon experience that Mastercam is THE premeire CADCAM package out there and I will continue to use it as long as my employer keeps my seat active!

[Hardmill]

That wasnt nice storky, its not his fault NX sucks

 

 

PEACE