Surfaces Problem V9.1 okay/ X not okay?

[#Rekd™]

Hi,

 

I have a drawing and tool paths that when verified in V9.1 look great but if you do the same in X I am getting a flat where I do not want or need one? Any ideas? The flat is where the slope meets the contoured hole, it shoud be sharp.

 

The files are on the FTP in the MC9 and MCX folders, the file name is "MILLERSOLIDFINAL1". I put the screen shots on the FTP in the all pictures folder, the files are "version 9.1 and version X"

 

Any help would be great!

 

Thank you

 

John Ford

[#Rekd™]

 

[b_daddy]

John,

 

I opened it up in X and it looks the same as the one for V9. I don't know why yours would look different.

[Thad]

John,

 

Set your verify settings to max quality in X and see if it looks right.

 

Thad

[#Rekd™]

Hi Thad,

 

It does look better with max quality!

 

Thanks

 

John

[#Rekd™]

Hi,

 

Big thank you to Kannon as well!

 

John Ford

[#Rekd™]

Hi,

 

Big thank you to Kannon as well!

 

John Ford

[Kannon]

[Thad]

quote:

---

Big thank you to Kannon as well!

---

For what, his moral support?

 

Glad to help.

 

Thad

[Kannon]

quote:

---

For what, his moral support?

---

yep..still good for sumfin!

[Kannon]

what I did was took his VersionX nc file, and reverse posted it using a VB script that allowed me to eliminate rapid moves, I then followed that with a point cloud digital thing that I used to recreate the surface with a skinning chook. It was unbelieveable, without anyone here working with Mastercam..all I could do was dance around my chair claiming Im the man.

but really..all I did was tell him the file he sent me in version 9 didnt have a flat in it.