for the post gurus

[mig]

Hi ,

Spent 4 hrs to modify my post for X2.

I am trying to pull out Z min and max volumes .

Actually it working but if I using several tools it puling Z min from the last operation only.

I know I some were really close but cannot find were is my mistake.

So I give up and asking post gurus to help me with this.

Any information will be appreciated

Thank you in advance

[Guest CNC Apps Guy 1]

Have you looked at the MPMaster for X2 post? It has that functionality in it. MPMaster is ALWAYS what I start with since it's so chock full of features (great job Dave ).

 

HTH

[mig]

Hi James ,

Thank you for advise.

[Allan Brown]

Thanks for the plug James. I'm forced here to admit that Brett, Chris, and now Russell are all responsible for pushing Mpmaster forward.

[Storkman]

quote:

---

I'm forced here to admit that Brett, Chris, and now Russell are all involved in pushing Mpmaster forward.

---

Bet that hurt.

 

j/k Dave.

[Guest CNC Apps Guy 1]

Yeah Dave, but YOU birthed MPMaster. They are maintaining and updating/upgrading it. Great team work though. Keep it up. :chers:

[crazy^millman]

Well it is a Damn good post no matter who started it, maintains it and makes it better.

 

[ 02-15-2007, 05:01 PM: Message edited by: Crazy^Millman ]

[jeff]

quote:

---

Well it is a Damn good post no amtter who startes t, maintains it and makes it better.

---

Tru Dat!

[Post dept]

Dave....you are my hero!

[crazy^millman]

Brett you are mine.

[bogusmill]

Get a room

[Mick]

I'll second, third, fourth, fifth etc etc that. Mpmaster, and the guys at Inhouse, are a credit to Mastercam. I have used Inhouse posts a lot in the past few years, and they would be the most dialled posts I have ever used.

 

Glasses of Cloudy Bay all round ( )