program help

[rgollar]

Hello,

could some one please help me understand why in this program on line N130 where it says X0Y0. Why when I change it to X0Y7.0 my machine at the end of the program it goes to this number but then goes right back to X0Y0. I like to change the y value so the operator dont have to reach so far in the machine to change a part. Im running a fadal cnc. Thank you for any help.

 

 

N100O0001(T)

(DATE=DD-MM-YY - 21-02-07 TIME=HH:MM - 19:50)

N102G20

N104G0G17G40G49G80G90H0E0Z0

N106( 1/8 CENTERDRILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - .125)

N108(DRILL)

N110T1M6

N112M61

N114A-0.

N116M60

N118G0G90S2000M3E1X0.Y0.

N120H1Z3.M8

N122G81G98Z-.2R0.1F4.

N124G80

N126M5M9

N128G91H0Z0.

N130E0X0Y0

N132M30

[Hardmill]

Make it look like this :

 

N100O0001(T)

(DATE=DD-MM-YY - 21-02-07 TIME=HH:MM - 19:50)

N102G20

N104G0G17G40G49G80G90H0E0Z0

N106( 1/8 CENTERDRILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - .125)

N108(DRILL)

N110T1M6

N112M61

N114A-0.

N116M60

N118G0G90S2000M3E1X0.Y0.

N120H1Z3.M8

N122G81G98Z-.2R0.1F4.

N124G80

N126M5M9

N128G91H0Z0.

N130E0X0Y7.0

M00

M99P102

 

Its a Fadal thing

 

 

PEACE

[rgollar]

Thank you so much for your help. will this make me have to hit the start button again since im using a M00? Or will when I hit start will it run the program again. Because when I use the optional stop I have to hit start 2 time to get it to run the program again. again thank you for the response this group is awsome.

[Hardmill]

Hit start and it will start the prog over.

 

 

PEACE

[rgollar]

Thank you for your help. My Operator will sure appreciate this to.

[Thad]

Where are you at in Michigan?

 

Welcome to the forum!

 

Thad

[Hardmill]

quote:

---

Where are you at in Michigan?

---

Im in Cali bonehead

 

 

 

PEACE

[rgollar]

I work for a small shop in lapeer called complextool.

[Thad]

Maybe you know Jeff.

 

Thad

[Thad]

quote:

---

Im in Cali bonehead

---

Knock it off, dummy! :SMACK:

 

Thad

[rgollar]

nope dont know him. I just started working out in lapeer in the last few months. I used to work at burton industries in goodrich for the last 10 yrs before i started working in lapeer.

[Hardmill]

quote:

---

Knock it off, dummy! :SMACK:

---

Hey You asked :EYE GOUGE:

 

 

PEACE

[Bryan Johnson]

Fadal moving back to machine 0 when the M30 is read.

 

Changing machine to run as "Format 2" will correct this problem.

[jeff]

Thad....Lapeer is small, but it's not THAT small