X+ for X2 MR1

[Günther Massimo - GMCCS]

http://www.gmccs.de/downloads/SetupX+_X2MR1.zip

[Johan van de Loenhorst]

Danke Gunther , did something change?

 

Johan

[pip]

Gunther

does the new version calculate the transform times now.

Still a brilliant setup sheet program.

[bhayden10]

If I have a file with 2 machines in it, is there a way to just print a tool list for each machine? Now it tries to print them both at the same time so it shows double tools. How do you guys get around this?

Thanks!

[Günther Massimo - GMCCS]

I'll look into it.

[Matthew Hajicek - Singularity]

Can I get it to bring me lunch too, so I don't have to leave my desk?

[Mike Whitten CAD/CAM Contractors]

Gunther,

 

Thanks! I love it.

 

 

Brian,

 

The only work around I know of is to open up the tool manager and save out the tools for each machine group to their own tool library. (*.tools) and then select file > load from the tool list utility. Once you do it a few times it is fine. It does not take that much longer.

 

Mike

[cadcam]

Gunther will you be supporting lathe soon?

[Günther Massimo - GMCCS]

bhayden10,

I've modified the tool list chook.

Now it lists only the tools from the selected operations. If no operation is selected, it lists all tools. It also lists all tools, if you get the tools from extern mcx files or tool libraries.

 

http://www.gmccs.de/downloads/tlist_X2MR1.zip

 

Unzip it to the chooks/X+ folder.

 

Please let me now how it works.

[cqualls]

Thanks, I use this set up sheet all the time.

[Midwest]

Thanks

 

 

[Randy Morton @ Clem Industrial]

Awesome program Gunther! I love using it, but I am majorilly lathe, I just wondered (as Jay said) if you are planning to run it thru that system...? =]

 

[Goldorak]

Thanks [Cheers]

 

 

in french: merci!!