minimaized toolpath manager

[Plastmo]

is it posible to have tool manager minimaized

during backplot and verification, and after, back to previous size?? (like in ver MC9??)

[Guest]

the OP manager minimized you mean?

 

 

Hit ALT + O or grab the edge and drag it over

[Plastmo]

yes, minimized, but in the way of MC9-automaticaly

when you start backplot

[Lee.]

Best thing to do, is to put it on the other monitor.

 

HTH.

[Programinator]

I had a small monitor 19 in and it seemed like there was no room for the op manager to stay on screen. So i got a larger wide screen 24 in and it is no problem now.

[Plastmo]

do I really have to invest in new hardware

to get functionality that was in MC9??

[Ocean Lacky™]

quote:

---

do I really have to invest in new hardware

to get functionality that was in MC9??

---

no, just use Alt + O like John said.

[Plastmo]

Ocean, of course I can use Alt+O but, this is not

what I am looking for. I found samthing similar but not exactly. When You go to machine group

properties/files/edit defaults then operation manager is minimized in bottom left corner, so

CNC INC., could You PLS!! put that routine in to backplot and verify function?

[Plastmo]

Uppps, I forgot, toolpath manager must be undocked

[Justin Beebe at Folsom Tool]

I just got a second monitor today and I am loving it. I have the op manager and level manager docked on one monitor which gives me the entire screen on the other monitor for my graphics window and verify. I know this is different than V9 and may not be what your looking for but using dual monitors in my opinion blows away the old way of doing things.

[Thad]

You could try Roger Martin's trick.

 

According to that thread, this is supposed to become part of X in the future.

 

Thad

[Thad]

double post

[Colin Gilchrist]

I just checked in MR2 Thad, INLINE is already there...

[Thad]

Colin,

 

It sounds like it doesn't work.

 

Thad