Linear move while interpolating a hole?

[neurosis]

I noticed this in my gcode after having mastercam interpolate a hole diameter.

 

N3 G0 G90 G54 X-.2764 Y.1237 A0. S1629 M3

N4 G43 H8 Z2. M8

N5 Z.13

N6 G1 G41 D48 X-.3295 Y.0707 F9.77

N7 G3 X-.3587 Y0. I.0708 J-.0707

N8 I.3588 J0.

N9 I.3588 J0.

N10 G1 Y-.0056 <--------- This scraps my part.

N11 G3 X-.3283 Y-.0758 I.1 J.0016

N12 G1 G40 X-.2745 Y-.128

N13 G0 Z2.

N14 M9

N15 G91 G28 Y0. Z0. A0. M01

 

Has anyone else run in to this problem? I set the overlap and it overlaps linear instead of using an arc.

[Guest]

circle mill, circle mill, circle mill

 

[Namliek_J@TheeCircle™]

quote:

---

circle mill, circle mill, circle mill

---

+53254

[Guest CNC Apps Guy 1]

I like ramp contour in addition to circle mill.

[crazy^millman]

Helix Bore Toolpath is perfect for something like this the mix of ramp and circle mill in one operation.

 

HTH

[Thad]

quote:

---

N10 G1 Y-.0056 <--------- This scraps my part.

---

C'mon, it's only 5 thou.

 

All joking aside, did it show up in backplot or verify?

 

Thad