Very small diameter taper mills

[Smit]

We have been purchasing .015 flat tip, 3 deg taper mills from Harvey tool to mill draft on engraving.

 

Recently Harvey discontinued carrying those tools as a stock item so I'm trying to find another vendor who does carry something we can use.

 

We can't go bigger on the tip than the .015 diameter, but we can go a little bigger on the taper angle, maybe up to 5 or 6 degrees.

 

Anybody know of a vendor for those small taper mills?

 

TIA

[Thad]

You could try J&L Industrial or Production Tool Supply. That's where we bought ours, although we used the .06 dia. I can't say for sure if they carry them that small, but it's worth a look.

 

Thad

[crazy^millman]

Try Internal Tool they might have them.

 

HTH

[Rick Henrickson 65]

scientific cutting tools

[Zbuilder]

Crawfor Saw & Tool in Greer, SC (864)877-5828

Ask for Bill.

[Zbuilder]

Crawford Saw & Tool in Greer, SC (864)877-5828

Ask for Bill.

[Mark H]

We use Harvey as well as Microcut

 

 

tapered endmills

 

Microcut local distributors

[Smit]

Thanks for the help gents.

 

Good tips, and I found what I need.