Hole Axis for X4.

[Ron Branch @ 5th Axis]

Hello Everyone, To get Verisurf's Hole Axis please go to here: www.verisurf.com/mastercam There is a download here button middle right of the screen. The download screen will come up and it is called Verisurf_Add-ons_for_MastercamX4.exe

 

Some things for people using this Add-on.

 

There is the Pierce, Hole Axis, Notes, PNG Screen Shot, and Hidden Line.

 

Some new things for people using this Add-on. Verisurf Surface Grid, Dynamic Surface Point, Curve to Points and Vectors, Verisurf Planes and Verisurf WCS.

 

Some of these new tools might be very helpful in the shop environment as well as aid in programming. Any questions or comments please shoot them our way. As always these tools are free so please pass on to anyone you think might benefit from them.

 

Thanks to Ernie for providing these free tools.

[Newbeeee™]

Thanks for this.

Had a job late last week where hole axis was worth its weight in gold!

[gcode]

HoleAxis and Pierce Point are priceless...

and Verisurf provides them for free..

Very cool

[Justin Beebe at Folsom Tool]

What does Pierce Point do?

[gcode]

Creates a point where a line pierces a surface

[Justin Beebe at Folsom Tool]

Sounds good

[DavidB]

This is a great add on thanks Ron where is Ernie?

[Ron Branch @ 5th Axis]

He is around just real busy and I had some people asking about it and wanted to let eveyone know we had it out and ready.

 

[ 06-15-2009, 03:11 PM: Message edited by: Ron Branch @ Verisurf ]

[Alvaro Gil - Cimquest-inc.com]

Thanks! I just started to sweat when I realized I had no Hole Axis in X4!

[Roger Peterson]

While it doesn't replace hole axis, using FBM Drill in X4 will give you vector lines.