Sub programs on HAAS

[gibbs machine corp]

Hello all. I have an existing program (O1001.nc) and I need to run on a jig that now holds 4 parts instead of 1. I'm wondering if I can write a program that calls the program O1001.nc up and runs it at G54, G55, G56, and G57 without having to reprogram O1001.nc. The program calls out G54 at the start of the program so I think I'll have to remove that. I've never tried to run sub programs before. Thanks in advance.

 

X4 MU2 Mill Level 3

[htm01]

yep, just call up G5? offset

then M98 P1001 L1

 

like

%

O1234

G54

M98 P1001

G55

M98 P1001

G56

M98 P1001

M30

%

 

don't forget the M99 at the end of 1001

[gibbs machine corp]

So in my program O1001 I need to replace the M30 at the end of the program with M99? Thanks for the quick response.

[Eric S.]

Yes replace the M30 with M99.

[gibbs machine corp]

Thanks.

[Hardmill]

Dont forget to remove any work offsets from the

sub program before you run also.

 

 

PEACE