finally getting an upgrade

[kazmir44]

Well, I'm finally doing it.

Upgrading from x2 to x4. Installing right now.

I hope this transition turns out to be smoother than the last.

[mayday]

quote:

---

I know this transition will turn out to be a disaster like the last.

---

fixed

[Dave.L]

Wes, have you got PowerMill yet? If so, what do you think?

[mayday]

not yet Dave, As far as what I think of it? thats a givin as I've used it before. We did some test 5 axis spiral toolpath output and compaired the two in a gcode backploter. quite a difference. There are 3 of us here that push the limits of Multiaxis daily. It can be really frustrating.

[Dave.L]

Wes, send me an email when you get a chance.

[MotorCityMinion]

52 machines? If you don't mind me asking, where are you working?

[mayday]

here

[gms1]

Wow you work at Moeller. Does Jeff Gilreath and Carry still work there?

[mayday]

Jeffery's still here modeling parts

[MotorCityMinion]

Jim Glenn ring a bell? I worked with him in the late 80's.

[kazmir44]

The other day i had a guy ask me, "Do you ever have days that you just want to punch someone in the face?"

 

I think today will be one of those days.

 

So how about them Tigers?

[mayday]

quote:

---

Do you ever have days that you just want to punch someone in the face

---

Kaz must be up and running with x4

[kazmir44]

Not really up and running. Installation is as far as i got. I was greeted with a huge stack of blueprints this morning from a new customer. So i guess x4 goes on the back burner until i get threw this stack.

 

Another day in the life.....

[Müřlıń®]

hey kaz make sure you have all the updates to X4...

[kazmir44]

yep...updated to MU3