X5 Setup sheets (GUI)

[Sandybar]

I did a search for this and did not find what I needed.

 

In the setting config pull down I can't find the GUI setup sheet file. Did they do away with GUI formatt. Works great for me.

[Guest]

GUI is gone

 

Try going into your tool manager, in the upper window, right click >> Import/export >> and output areport

[Sandybar]

GUI is gone

 

Try going into your tool manager, in the upper window, right click >> Import/export >> and output areport

 

Okay thanks, I will impelment the new active report. I like it but other guys on the floor are not so up on change.

[Guest]

That works if you just need a quick tool list, If you're looking for more, then something with Active Reports is going to be the way going forward.

[D Ford]

I did a search for this and did not find what I needed.

 

In the setting config pull down I can't find the GUI setup sheet file. Did they do away with GUI formatt. Works great for me.

 

I'm trying to get GUI working in X5 any suggestions.

[shazam/TPP]

GUI is gone

 

Try going into your tool manager, in the upper window, right click >> Import/export >> and output areport

[Rob @ Target Machine]

In your Tool Mgr. Import/export tools -> Report or Detailed Report

 

 

[Etrain]

GUI is gone

 

Try going into your tool manager, in the upper window, right click >> Import/export >> and output areport

 

 

 

I am running a MillTurn. This report does not work very well for what I am doing. It only will give a milling tools report or lathe tools report. It does not include both.

[jesse@desemco]

X+

[DCLARK]

Why did they take the GUI tool list out in the first place?? From what I am hearing many people used it on a daily basis and are not happy (including me). I have used the active reports setup sheets and have gone thru the configuration tutorial and it just does not do as good a job as I did myself with screen capture and paint. The GUI tool list was the perfect companion for our setup instructions. It seems to me that with so many people not happy with the decision to remove this simple little part of Mastercam that they would bring it back or at least give programmers an option to download a service pack. Any chance that this will happen in the future??

[Guest]

....they would bring it back...Any chance that this will happen in the future??

 

From what I have heard, no

[Elmer Fudd]

Rob, how were you able to change which columns are displayed on your tool list?

[shazam/TPP]

sandybar checkout this

link

 

edit: or just switch to x+