help deleted all operations by accident

[MIKO ELLO]

I accidentally deleted all my tool operations! does anyone know how i can restore it. i made alot of change in past ten minutes and i dont want to start over.

[Scottdyna]

If you didnt save it at all before then i dont think there is any way to restore them. At least I have never figured out a way.

[LaszloK]

You will probably spend more than 10 minutes trying to figure out how to recover. You always do a better job the second time around anyway

[#Rekd™]

If you deleted them there is an undelete option. If you hit the firecracker they are gone as far as I know.

[Justin Beebe at Folsom Tool]

If you ever accidentally delete your operations you can right click in the ops manager and select undelete. This only works if you do it immediately after you delete them. You can also try closing mastercam without saving your file and when you open mastercam again the deleted operations may be back. The safest way is to turn on the autosave/backup feature so your files are being backed up as you program.

[buck30]

Try Alt O just incase it is just hidden and not deleted.

 

sorry if this seems dumb but one never knows

[MIKO ELLO]

Thanks, I just started over

[Mic6]

You always do a better job the second time around anyway

[Scottdyna]

Cool I learn something new about this software everyday. Didn't even realize that undelete was in there.

[JAMES GABEL]

I also didn't know it wad there.