WCS origin jumps

[BrianP.]

Having fits with one file. Everytime I go to isometric view my origin jumps off the part. I have to go to the manager hit the = for C and T planes in the view and it comes back to the part. Only on the ISO view does it do this. Top, front back etc.. it does not happen. Also cannot get the associative box to check. Anyone see this ? Thanks.

[Scott Lundin Shopware Inc.]

Go to settings/configuration/cad settings. Revove the check mark on "Reset cplane to top in ISO Gview". I also prefer to remove the check mark on the one above it also.

[BrianP.]

Alreadt tried that. Not it. The equal sign for C and T does not jump to a different view. It is not there at all.

[G10X0Y0Z0]

make sure your enable origin box is checked in your view manager.

[cormigu]

look like:

 

My link

[BrianP.]

cormigu that looks like it. Same thing. From your link I see nothing was ever figured out. The origin jumps and you have to re-click the = sign and then it goes back. Were you able to check the associative box. I cannot do that. The box highlights and moves like it is working but will not take a check mark.

[gcode]

The box highlights and moves like it is working but will not take a check mark.

 

That's because it has nothing to be associative to.

Draw a point where you want the view's origin to be

and select with the views point selection arrow.