Tool manager report

[overthecrossbar]

does anybody know if and how we can do this.

[JBowman]

Ad "CODE" to a Data field on the "-Tool List (MILL-DETAILED).rpx" in one of the Text Boxes and change the Label to match.

[Aeroguy]

Thanks JBowman,

But I have a couple quick questions, do we have to link the header to a specific code in the rpx file? I was able to add the header TOOL CODE but it doesn't post out the manufactures tool code I typed into the tool form.

Any chance you could give a bit more details?

[K2csq7]

 

Tool manager report

What kind of report?

[overthecrossbar]

ActiveReports- tool list(mill simple)

[K2csq7]

Sorry, I don't use active reports... but I do use the manufacturers tool code in my post...(tooltable)

[Chris In-House Solutions]

Below are the steps used to add this using the ActiveReports Designer

 

To output the Manufacture's tool code you need to Select the plus next to Bound, Scroll down to NCFILE choose that plus, pick the plus next to TOOLS, and then the plus next to TOOL. Scroll down and find CODE. Then drag it over to your report and it should work.

 

I have added this feature to an existing report before and got it to work.

[overthecrossbar]

I have a bound error, could not find a part of the path SST/SAMPLES/MILL/SSM.xml

[JBowman]

If your using the simple tool list ”-Tool List (MILL-SIMPLE).rpx” you have to either change an existing data field or add another one then adjust the boxes so they all fit. Then you have to go into “Tool List (MILL-SIMPLE).rpx” and change the headers to match. The attached pic shows the DataField of a TextBox where to change or add “CODE”

[overthecrossbar]

If your using the simple tool list ”-Tool List (MILL-SIMPLE).rpx” you have to either change an existing data field or add another one then adjust the boxes so they all fit. Then you have to go into “Tool List (MILL-SIMPLE).rpx” and change the headers to match. The attached pic shows the DataField of a TextBox where to change or add “CODE”

That's done the trick, thanks guys.

[NOTW Programmer]

I have a bound error, could not find a part of the path SST/SAMPLES/MILL/SSM.xml

Has this been adressed.