Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

High speed machining from a starting point


Recommended Posts

Is there a way to start high speed maching when using dynamic milling from a point vs the starting point mastercam chooses? I notice where it helixs down there is a check box that says start at a point but it does nothing when checked. Thanks in advance

Link to comment
Share on other sites

...and some times you have to make sure your start point is selected prior to the contour chain. Go into your chain manager and drag the start point to the top. If for some reason there is not enough room to start at the point you specified, Mastercam will ignore the start point. It might take a bit of experimenting.

 

Good luck.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...