Closed X6 file and X7 closed with it.

[Thee Rickster ™]

Has anybody seen this behavior?

 

I have been doing it this way for years, is this a windows thing or

is X6 and X7 Tied together some how?

 

Lost 1/2hr worth of work in X7!!!!

 

Regards

Rick

[Newbeeee™]

Lost 1/2hr worth of work in X7!!!!

 

Regards

Rick

Hope you're staying on later tonight unpaid of course

[Newbeeee™]

And no, but I'm running X5 along X7.

I have noticed that 'save before verify' is back with X7...

[Thee Rickster ™]

And no, but I'm running X5 along X7.

I have noticed that 'save before verify' is back with X7...

 

The old bugs are the new bugs too..... will they ever get it right....LOL

[#Rekd™]

Happened to me last week a few times,X7 closed for no reason.

[#Rekd™]

I just had two sessions of X7 open (small files) and I closed one while the other was generating a tool path....they both closed!

[BenK]

It happens to me all the time in X6. If I hit close and select a different instance of mastercam it will close the one I select as well. That was in XP just switched to Windows 7 last week so I'm not sure if it will still happen.

[Kevin Kostiuk]

I upgraded a pc to MU2, so it had X6 and X7 MU2 on it. Both became completely intertwined. X7 was using some X6 files so I uninstalled X7 and that messed up X6. I ended up dumping everything from both X6 and X7 and starting over with just X7. Not sure if that was a one time glitch or maybe other people might be seeing it. I have several other computers here with both 6 and 7 on them and have not seen this issue except the one time.

 

Kevin K.

[Cannon]

Has anybody seen this behavior?

 

I have been doing it this way for years, is this a windows thing or

is X6 and X7 Tied together some how?

 

Lost 1/2hr worth of work in X7!!!!

 

Regards

Rick

 

Yes. This started to happen when I installed X7. If you have two session of X7 open, decide to close and save the first one and while saving go to the other window, they both will shut down. Of course the second session is not saved..

[Sticky]

I've had some weird stuff happen while running multiple instances, so I just don't do it anymore. Sure would be nice to be able to reliably run multiple instances and drag and drop geometry or tool paths.