Need a post for lathe

[newbie70]

Hi Members

 

Need a lathe post with Fanuc - OT controller - 2/3 axis lathe.

 

Thanks in advance

 

Newbie

[DODGERFAN]

See your dealer.    

[K2csq7]

Did you try goggling lathe post?

I found one at harbor freight for 99$!!

 

http://www.harborfreight.com/quick-change-tool-post-set-for-mini-lathe-42806.html

[CJep]

Hi Members

 

Need a lathe post with Fanuc - OT controller - 2/3 axis lathe.

 

Thanks in advance

 

Newbie

 

Ah,.... Newber

The outright asking for a post processor is frowned upon and could result in a flaming

It would do you well to read the forum rules concerning askin' for a post

 

eMastercam.com is not the place to ask for a post processor. If you need post work done, please see this wiki entry.

 

 

So don't ask for a post,....

 

Inquiring about editing help is another issue and a horse of a different color.

[Reko]

Did you try goggling lathe post?

I found one at harbor freight for 99$!!

Gots to get me one of those.

[THEE THAINZ™]

Newbie dug himself a hole and needs a post to put in it....

[gcode]

the first rule of holes

1. when you're in one, stop digging