Siemens 810D with MC

[DavidB]

Hi guys is anyone out here using a MC post to run their Siemens 810D controller on their 3 Axis mill and Lathe?

I have a customer who has a Vertical eco from DMG and an eco Lathe. Can these machines run with ISO code?

Can these machines be run with ISO code if so how?

 

DMG are saying they need to run in Siemens language and MC say they don't have a post for these machines.

 

Thanks in advance.

[#Rekd™]

We had a DMG CTX 310 lathe with live tooling and c-axis. We have an In-House Solutions post. It had a 810D control.

 

It took a while to get it working properly but it did fine.

 

DMG has since replaced it with a newer model with the 840D control. The post is being adjusted currently for the updated control.

 

I can post some sample code if you want to see the format.

[DavidB]

Did it post ISO code?

What does the file extension have to be for running ISO code with these controllers?

[#Rekd™]

Yes G-code. It is an .MPF file/

 

Here is a sample of the code.

 

DIAMOF
G0 G53 X6.25 Z18.5 D0
STOPRE
DIAMON
G18
T="OD_ROUGH"
G54
SPCOF(4)
SETMS(4)
G95
G97 S4=2000 M4=4
G0 X1.2 Z0. M08
G96 S4=1200 M4=4 LIMS=2000
G1 X-.0625 F.012
G0 Z.1
M09
G97 S4=2000
DIAMOF
G0 G53 X6.25 Z18.5 D0
M01
DIAMOF
G0 G53 X6.25 Z18.5 D0
STOPRE
DIAMON
G18
T="OD_ROUGH"
G54
SPCOF(4)
SETMS(4)
G95
G97 S4=2000 M4=4
G0 X.9241 Z.21 M08
G96 S4=1000 M4=4 LIMS=2000
G1 Z.11 F.012
Z-.645
X1.
X1.1414 Z-.5743
G0 Z.21
X.8482
G1 Z.11
Z-.645

[Jayson Kramer]

Here is code for the 840D for a DMU-50 I just posted.

;PROGRAM   - SLIDING DOOR HANDLE 2.MPF
;DATE      - 2014.12.04
;TIME      - 7:51 PM
;T1   -  1/2 FLAT ENDMILL    - D1   - D0.5000"
FGROUP(X,Y,Z)
G00 G17 G40 G70 G90
G00 G153 D0 Z-.1
G153 X-19. Y-.1
G00 B0. C0.
M1

N1
T1 ; 1/2 FLAT ENDMILL
M06
G90 G00 G153 D0 Z-3.
D1
TRAORI
ORIWKS
G54 G17
G00 X-3.7 Y0.2093
B10. C270.
; FINISH NORMAL
CYCLE832(.001,1,1)
X-3.7 Y.2093 Z2.4876 S1069 M03
Y.817 Z-.9593
Y.8865 Z-1.3532
G94 G01 Y.9039 Z-1.4517 F6.42
X-3.6364 Y.8768 Z-1.4564
X-3.5691 Y.8602 Z-1.4594
X-3.5 Y.8546 Z-1.4604
X-3.45
X-3.4
X-3.35
X-3.3
X-3.25
X-3.2
X-3.15
X-3.1
X-3.05
X-3.
X-2.95
X-2.9
X-2.85
X-2.8
X-2.75
X-2.7
X-2.65
X-2.6
X-2.55
X-2.5
X-2.45
X-2.4
X-2.35
X-2.3
X-2.25
X-2.2
X-2.15
X-2.1
X-2.05
X-2.
X-1.95
X-1.9
X-1.85
X-1.8
X-1.75
X-1.7
X-1.65
X-1.6
X-1.55
X-1.5
X-1.45
X-1.4
X-1.35
X-1.3
X-1.25
X-1.2
X-1.15
X-1.1
X-1.05
X-1.
X-.95
X-.9
X-.85
X-.8
X-.75
X-.7
X-.65
X-.6
X-.55
X-.5
X-.45
X-.4
X-.35
X-.3
X-.25
X-.2
X-.15
X-.1
X-.05
X0.
X.05
X.1
X.15
X.2
X.25
X.3
X.35
X.4
X.45
X.5
X.55
X.6
X.65
X.7
X.75
X.8
X.85
X.9
X.95
X1.
X1.05
X1.1
X1.15
X1.2
X1.25
X1.3
X1.35
X1.4
X1.45
X1.5
X1.55
X1.6
X1.65
X1.7
X1.75
X1.8
X1.85
X1.9
X1.95
X2.
X2.05
X2.1
X2.15
X2.2
X2.25
X2.3
X2.35
X2.4
X2.45
X2.5
X2.55
X2.6
X2.65
X2.7
X2.75
X2.8
X2.85
X2.9
X2.95
X3.
X3.05
X3.1
X3.15
X3.2
X3.25
X3.3
X3.35
X3.4
X3.45
X3.5
X3.5691 Y.8602 Z-1.4594
X3.6364 Y.8768 Z-1.4564
X3.7 Y.9039 Z-1.4517
G00 Y.2093 Z2.4876
CYCLE832()
G64
TRAFOOF
M05
G00 G153 D0 Z-.1
G153 X-19. Y-.1
G00 B0. C0.
ROT
TRANS
M30

[DavidB]

The customer has been told by the local MC reseller they can not provide a post for both the Vertical and Lathe.

Is there a post that you can mod for these machines?

 

What Is the file extension needed to run NC code on these controllers?

[#Rekd™]

.MPF file extension.

 

In-House has posts for these controllers.

[Mick]

The customer has been told by the local MC reseller they can not provide a post for both the Vertical and Lathe.

Is there a post that you can mod for these machines?

 

What Is the file extension needed to run NC code on these controllers?

 

Obviously, the reseller only looked so far...

 

I did some posts for the 810D a few years back. Also, as Bubbles indicated, InHouse have posts for these machines, as do other third party post suppliers.

[DavidB]

What's the best way to contact In-House?

[Greg Williams]

Send them an email, you will need your SIM number and your delaers contact info.

[DavidB]

Where's there email info Greg? Oh and Happy Birthday!

[Greg Williams]

Thanks mate, Another year wiser!

 

[email protected]

[Thee Cutterman]

Who have you been speaking to David.

 

 

Have a good one Greg    Cheers  Daz

[DavidB]

The customer has been told by the Australian MC reseller they can not provide a post for these two machines. Because I use to work for DMG Mori they contacted me asking what I used when I was at DMG Mori. I used a post from Dave Thomas back then.

[Jayson Kramer]

My post I posted earlier is from from Dave Thomas. He works directly with the Mastercam dealers and a few Manufacturing reps like me.

[DavidB]

The customer has spoken to Dave and he told them he cant do Siemens canned cycles for the Lathe post as he modifies a Fanuc base post.

The customer is looking at getting rid off both these ECO DMG Siemens controlled machines because MC cant support them.

[#Rekd™]

Not sure what Dave is talking about but our In-House post is from a Generic Fanuc and it does Mastercam canned cycles.

 

Here is the header from the post:

 

[post_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V14.00 E1 P4 T1334327663 M14.00 I0
# Post Name           : CTX_SIEMENS_810D
# Product             : LATHE
# Machine Name        : SINGLE TURRET SINGLE SPINDLE LATHE
# Control Name        : SINUMERIK 810D
# Description         : GENERIC FANUC LATHE C-AXIS POST
# Mill/Turn           : YES
# 4-axis/Axis subs.   : YES
# 5-axis              : NO
# Subprograms         : YES
# Canned Cycles       : YES
# Executable          : MP 10.0
# Encrypted to SIM    : DEALER
#
# WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO
# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.
#
# Associated File List$
#
# Associated File List$
#

[DavidB]

^^^

Thanks they will contact In-House