Starting over

[Art@Pegasus_Tool]

I have been reading the posts here for awhile now and have found most to be very helpful. So thank you in advance for any suggestions on this issue. A little background on me I have been a machinist since 1978.Starting from the automotive robotic transformation systems of the 1980’s to working than running a Mold Shop in the 90’s to Owning & running ,working & scratching out a living here at Pegasus Tool since 1999. We own 1 seat of MasterCam and my top guy owns a seat of Surfcam which we use on a daily basic. Well 1hour is past problem seems to be worked out, Thanks again and sorry for getting off on the wrong foot please forgive me I look forward to participating here.

 

 

Art

[Fig sign]

Well said !

Welcome to the Forum , Art !

 

HF

[robk]

Welcome to the forum

 

Rob

[Brendan P]

Welcome to this great forum.

This place can be a bit rough around the edges at times,but it is all in how you approach it.

Many smart people here.

[Philcott]

Art,

 

You will find this forum an invaluable tool. Welcome.

 

Phil

[Harryman]

All of us have had to go back outside and scrape our shoes off from time to time.

 

Welcome

[cadcam]

So Art Did Steve contact you?

I put a call in for you.

 

Glad it's all worked out.

[Art@Pegasus_Tool]

Roy called shortly after the first post and is looking for who dropped the ball so alls well for now.I'll bet its in the mail.

 

 

Art

[mayday]

Roy and his people are a good bunch. have always been able to rely on them. Kinda miss not having Roger down there. If your looking Roger,how you like it out east??

[MACHINEMASTERG]

welcome

[chris m]

Welcome to the forum Art

 

C

[Lathe-Mill]

welcome to the forum art

[iowajim62]

Hi Art,

 

Welcome to the Forum ! Again

 

All is well fellow Mastercammer

 

My first request on the Forum was for a 5-axis Post of all things. Shoulda seen how ugly that got and how stupid I felt afterwards. It's all good bro Have Fun !!!

[Müřlıń®]

Welcome to the Forum Art.

 

 

 

quote:

---

My first request on the Forum was for a 5-axis Post of all things.

---

heh......I'm glad I already had my post before I came here or I prol woulda asked for one meself.

 

 

Murlin

 

[ 10-31-2003, 04:34 PM: Message edited by: Murlin ]

[MetalMarvels]

Welcome to the forum!!!!