fillet

[toolanddieprogrammer]

Hello there I am having a problem adding a fillet to my part I need some help

[JayM]

We need a lot more information to be able to help.  Please describe exactly what you are wanting to do.

[toolanddieprogrammer]

this is a mill level 3 exercise to draft surface, create curve on edge, flat boundary surface and fillet surface  I was able to add 3 fillets but the top one wont work

[Guest]

I am going to close the other topic you started, this is #3 on the same subject...I merged your 1st to topic into 1

[toolanddieprogrammer]

 

 

 

 

 

I added pic of how fillet turns out

 

 

[BenK]

Select the top surface as your first set of surfaces, than select all the inside wall as your second set. In the fillet surface to surface dialogue box click on the flip normal button in the top right corner and set the surface normals inward. 

[toolanddieprogrammer]

I have tried this many times it doesn't work but thanks for your help

[specv]

It looks to me that the trim box is not selected when doing the fillet.

[toolanddieprogrammer]

Yes the trim box is checked

[specv]

can you share the file?

[toolanddieprogrammer]

here is a zipped file

mill level 3 tutorial # 1 Review Exercise C.zip

[BenK]

I can get the same result as your picture if I only select 1 vertical surface as my second set. The key is to select all the inner vertical surfaces together as the second set. 

[Guest]

Video coming up  

 

 

May take a minute or 2 to go live, I threw it together quick, I may do something more in depth later on....

 

[BenK]

Video coming up  

 

What do you use to record a video like this?

[Guest]

I use SnagIt

[toolanddieprogrammer]

thank you all I did get it I had to reclick on second surfaces again to reaim the arrows or it would say no fillets selected thanks again everybody

[crazy^millman]

We need a lot more information to be able to help.  Please describe exactly what you are wanting to do.

Funny I say this I am an arse.

[JayM]

<----- When you bust out the claws, people get very agreeable.