WCS Jumping around

[Trapper Paul]

Why does my WCS jump around?

[Guest]

Gonna need more than that, lol

[djstedman]

I am going to go out on a limb here and say without a better explanation of what's happening no one will be able to help you.

 

If you want people to take the time to answer your question, start by taking the time to ask it properly.

[Thad]

Maybe you have "WCS = Gview" checked?

[Trapper Paul]

OK OK I get the message - some of us have to actually work for a living - just a joke

 

 

I program on B side (WCS for it) and I program A side (and WCS of it) and I go back to working on B side, bringing up its WCS also as soon as I pick some geometry (I'm in ISO) it jumps to TOP or sometimes jumps back to A side WCS.

[Guest]

ok...

 

 

Go Machine Type >> Design >> File >> New

 

That will clear everything out

 

Settings >> Config

 

Then change these 2 settings

 

 

Shut down and restart Mastercam

[DODGERFAN]

some of us have to actually work for a living

 

 

Then you are doing it wrong.  

[gms1]

Can someone point out what the 2 settings are? That web site is blocked.

[djstedman]

On the cad settings page, the two settings noted in the image are..

 

Update Cplane and Tplane when changing Gview (set it to unchecked)

Reset Cplane to top in ISO Gview (set it to unchecked)

[Trapper Paul]

_{ok..... Thanks a lot guys}

[Tyler Robotson]

I'm sure they would say you're welcome, but they're probably back to working again

[Thee Rickster ™]

I'm sure they would say you're welcome, but they're probably back to working again

Why, are they from Canada?....

[DODGERFAN]

Why, are they from Canada?....

That would be:   I apologize!!!

[Trapper Paul]

^{Again many thanks to ALL of you that helped. I sure do appreciate the help all of you have done over the years.}

^{Paul Kaiser}

[Guest]

[Thad]

I am going to go out on a limb here and say without a better explanation of what's happening no one will be able to help you.

 

 

I knew exactly what he meant the second I read it.

[hookhand]

I was having same problem. Thanks!

[Incogneeto]

Yessir mine too. Thanks