Panels manager tabs question in mastercam 2017

[Joeyls319]

Hello all

Working in Mastercam 2017 and I have the levels/toolpath/planes/solids operation manager panel on my second monitor.  I clicked on the levels tab and dragged it over so now I have two panels on the second monitor.  one is the levels manager and the other is the toolpaths/planes/solids manager panel.  My question is how can I make the levels manager apart of the toolpath/planes/solids manager panel again so I only have one panel?

Thanks ahead of time.

Joey

[Joeyls319]

I figured it out.

[So not a Guru]

19 minutes ago, Joeyls319 said:

I figured it out.

How is this done?

[Joeyls319]

Docked one of the panels.  Then I dragged the other panel over to the docked panel.  Wait a second for the little display to pop up and drop it on the center screen display.

[gcode]

I've got all 4 main panels (Toolpaths, Levels, Planes and Solids) docked together into one panel on my 3rd monitor.

 The tabs are at the top of the Main panel but you can move them to the bottom if you prefer.

This is a really nice arrangement IMO. 

Its easy to switch between different panels and they are all right under you mouse.

 

See the attached screen shot

 

MC2017 Tabs.pdf

[Joeyls319]

Gcode

I agree.  it is a nice feature.  I have mine setup like yours.  very convenient.

Joey

[jeff]

58 minutes ago, gcode said:

 The tabs at the top of the Main panel but you can move them to the bottom if you prefer.

 

How do you move the tabs from bottom to top? Or vice/versa

[crazy^millman]

11 minutes ago, jeff said:

How do you move the tabs from bottom to top? Or vice/versa

Right Click in the blank space of the ribbon for Customize then Options.