Fixture table and fixture plate for MasterCam 2018

[Laebs]

Would anyone out there know where I could download Files for a fixture mounting system.  I have seen them used before.  There is a base Plate with threaded holes and dowel holes alternating.  Next there are mounting plates the can be quickly attached to the main base plate for quick and accurate setups.  Usually a vise or fixture is mounted to the mounting plates.

It would be great if anyone out there could help me out with this.  I can't express how much i would appreciate it.  We are so short handed here I am back on the floor doing most of the setups.  If I could make it easier and quicker for the other less experienced operators I could spend more time improving our current programs and actually take the time to draw something like this myself.

 

Thank you so much to whoever could give me some help with this.  Gotta run to the floor now.

Have a great day!

[Leon82]

Sounds like Bock system.

 

I think jergins bought them. They can be downloaded from their site or even Msc I believe

[crazy^millman]

Check these guys out. Stevens Engineering out of Arizona.

Models to download.

[crazy^millman]

ohhhhh

Edited February 1, 2018 by C^Millman
Double Post no reason to repeat myself.

[CEMENTHEAD]

FixtureWorks has models.

CarrLane has models

TombstoneCity has models as well

And my favorite, McMaster also has them.

[specv]

This is the system we have

http://bluco.com/modular-fixturing-for-machining/