Metric to SAE Dr. Who Mystery...

[Kampfzentrum]

I apologize if this is a common question or found widely on the forum, I could not find any details.

I know how to convert an SAE document to a metric one using the Settings > Configuration > Current, etc... But here's my issue... I have a huge drawing done in metric. Instead of 25.4ing every dimension, I'd like to draw it in metric and then POOF! convert it to SAE. But when I do so using the above steps, the drawing scrambles and doesn't resemble anything like what I should get.

Is there another way to transfer the drawing from SAE to metric that I'm missing?

[Matthew Hajicek - Singularity]

Bring it to Logopolis.

[#Rekd™]

Transform - scale ? Just save the original and rename the scaled one.

 

 

 

[jeff]

Yep, Transform Scale is what I do.

Click on the middle one of these 3 circled and you're good to go.

 

[Kampfzentrum]

Awesome, thanks guys.

 

[Leon82]

when you type in a value if you type mm aftter it converts it to millimeters