stevieboy
-
Posts
343 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by stevieboy
-
Hello again ya'll Well I was able to recreate the rib (solid) using a soild sweep, Did the Boolean Common Region Na And got the dreadful: Parasolid ® Kernel Interface Error: Boolean Error:Face Imprinting Operation Error I'll Keep trying [ 07-14-2006, 10:17 AM: Message edited by: stevieboy ]
-
Hello all I've ftp to (mxc files)( new 384 part cavity) And yes Matt I need all the help I can get. Anyway I put the file on the ftp site for (everyone) to see Thanks Kannon! Thanks Matt! I'm working on it this morning stevieboy
-
Hello all I have a solid that has a rib on top, I need to make a insert for that rib, so I can shim the rib up if need be, what I need is a slot and the insert. When I try to do a Boolean, the target body and the tool body are the same, since the rib part is part of the soild. How do I seperate the rib? Hope this make sense. Thanks
-
Ok, Thanks Thad
-
McamX MR1 Not MR2 again yet Thanks again! Thad, 3D construction plane is probably required... Creating geometry to rotate the part?
-
Oop's sspoke to soon, Let me try your explained example. "Oh... nice job by the way!
-
I was able to do as Doug suggested and It worked But,I was looking to move the part to the origin, flat on the z plane.
-
Hmmm... Ok, Will that then be Origin? Let me give it a try. Thanks John Thanks Doug
-
Hello all When I import parts in from Iges, most of the time they come into Mcam on all kinds of angles or just out there in space, how do you go about putting the part say... on the z plane, so it lays flat?
-
thanks deckerc
-
Thank Kannon
-
Hello All When I do a 2d contour around a part or when I do a surface finish contour on a 3d part I get facets of segmantation were I need the parts to be smooth finishes, to cut down on polishing. (draw sections for Dies) Thanks
-
Thanks Thad I'll do a little more exploring in the config. Thanks again!
-
bump
-
Hello Again And thank you for the Great support! What made me start thinking about the Defaults in the first place, was the fact that I use Create Point Dynamic quite a bit, along with Create circle Edge Point, On circle Edge Point it's Defaulted to 2 Point.. But on another seat of MCX it's Defaulted to 3 point, which I use more, Leading me to believe a Default setting. Once again thanks for the help!! stevieboy
-
Hello there, out there.. Let's say you want use Trim/Break, Then you click on Trim/Break, is it possible to set the next pick to Default to Trim 2 Entity? Thanks
-
Six of one, half a dozen other another... Thanks for the help! stevieboy
-
Hello all Lets say you want to Dowel 2 blocks together (solids) Extrude cut though both blocks and Select target, target body only give you one pick and you have two bodies to pick. Thanks
-
Select a 2nd line??? Picking WCS named View
stevieboy replied to stevieboy's topic in Industrial Forum
Hello again Where ever the hang up was, I did a Ram Saver and has seemed to be the fix. Thanks again! -
Select a 2nd line??? Picking WCS named View
stevieboy replied to stevieboy's topic in Industrial Forum
Thanks Jim I may have to reload the software, I'm getting this box ...(Select a 2nd line)...On just about everything I do. I'm a fan of #6 also -
Select a 2nd line??? Picking WCS named View
stevieboy replied to stevieboy's topic in Industrial Forum
I am able to go to the red Icon box(WCS)( tool bars) and It works find. Thank ya'll for the help! stevieboy -
Hello all Has anyone had trouble with WCS named View? When I pick WCS in the bottom right hand corner, and the pick named view, I get a little box that comes up...(Select a 2nd line) Not sure of whats going on here, so I hit esc...then esc again and I get this message... An invalid argument was encountered. This happen 100% of the time. How you ya get to the list of named view ? Thanks
-
Thank you!
-
Hello I have found that, I can go into Mcam V9 and Print hard copy and get shade, bring model into X and no shade, I also found that, if I change printer to HP Auto 970, I can print a shades model. Does X support Lexmark Z 705 Driver? Thank
-
bump