stevieboy
-
Posts
343 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by stevieboy
-
Hello again Chris, Drivers are updated. I can Print in wire frame color or black. If I shade the model and print, I get a blank sheet of paper. If I do a print preview the shade is there, color or black. AutoCad,Visi,SolidEdge,Paint or a Picture all print Ok Thanks for your help stevieboy
-
Hello Chris I am using a Lexmark Z 705 Background color is Black, But I've tried other background colors and still get on shade just blank
-
Thanks Matt But, I've tried that, I am going to get with Tech. support today. Thanks for your help
-
Hello All Not tring to beat down a dead dog here, But since I've loaded MR1, I can not print shaded view, wire ok and in color. When I have something shaded on screen and print I just get a blank sheet of paper, Do a print preview and it looks good... I've checked everything I can think of, I think its something in x, Cause I can print shade in everything but x Thanks
-
2D contour rapid's up at the end of chain
stevieboy replied to stevieboy's topic in Industrial Forum
""Oh Yea""" My cycle time went from 51 mins. to 22 mins. -
2D contour rapid's up at the end of chain
stevieboy replied to stevieboy's topic in Industrial Forum
jmparis and maestro I got it! I tried both ways and they both worked great!! Thanks for ya'll help! stevieboy -
2D contour rapid's up at the end of chain
stevieboy replied to stevieboy's topic in Industrial Forum
jmparis I've checked it, it does not seem to work. thanks -
2D contour rapid's up at the end of chain
stevieboy replied to stevieboy's topic in Industrial Forum
jmparis I've checked it, it does not seem to work. thanks -
Hello everyone, I'm using a 2D contour toolpath to cut a profile along one side of a part that I'm machining, My problem is when my tool gets to the end of the chain it rapid's up and then across to begining of the chain (wasting time)How can I make the tool step down at the end of the chain. (so the tool is cutting in both directions. Hope this is understandable. Thanks
-
Hello again.. Just to keep the project going I created an extruded solid across the part, just so I could get the machining started. I would still like to know to create the surface across. Thanks again stevieboy
-
Hello all I need to create a surface across this part (from front view..just like if you were to slice through the block, using the top of the part..my tool need not go below the surface, I have uploaded this file to the FTP site under( mxc files ) (385 surface help zip) Thanks for the help and I hope this is understandable.
-
HevyMetl I did just what you said... And it worked!! Thanks for the help. Ps cool clip
-
Hello When I get a Iges file from a email attachment and open it, the Iges file always opens up in 9 What do I need to change so my files open up in X Thanks for your help
-
htm01, Yes, You are right! Set Normal! Thanks You! stevieboy
-
Hello Create/surface/Fillet Surface/Surf to Surf When I pick the two surfaces I want to Fillet I get a message that says "No Fillets Found" I just want to Fillet an edge. Thanks
-
Thanks Mike After missing around with a few toolpaths... I found that Surface Finish Blend worked very nice! and saved me from creating two other Operations (SFP) "It's almost as fun as; "Call of Duty" Thanks again!! stevieboy
-
Thanks for all the advice, Which I'll try soon I found the problem, and it was my doing. I had my total tolerance set to .005, I thought it was .0005 Sorry.. " Oh yea.. also I said Scallop, I should have said segmention, The scallop was ok Must have been all that turkey! or Thanks again for all Ya'll help!! stevieboy
-
Hello All When I do a Finish Radial tool path on a core (elbow shape part) On the ends of the part I can do a Finish parallel But the middle of the part is where I'm trying to do a Radial to sweep round the curve of the elbow The problem I'm having is the Radial is leaving a Scalloped finish. Also I would put a picture of the part here. but I don't know how to insert it. Thanks
-
Thad,DavidB Thanks for the help!! stevieboy
-
Ok guys it seems to be working now, But I think there is still someting wrong. Like I said earlier, I had this problem yesterday.. And I sent this program to another computer without changing anything, and it worked fine sent the program back to mine and the Boundary error thing again! The funny thing is the boundry is a simple rectangle 1 in over the part. Thanks guys for your help
-
Tried filleting, Now I can change my cut depth But it will only go .700 deep I'm going to try a reboot and see what happens Yesterday I reloaded X because of this problem Give you a update in a few mins. stevieboy
-
Ok, I'll give it a shot Thanks
-
Hello Cutting a cavity that looks kinda like a PVC elbow sliced in half. Dia about 2 in. and about 4 in lenght Surface Rough Pocket-set the cut Depths to -.700 Everything work as it should. If I change my cut depth to anything other than -.700 I get this Error.... Boundaries may not intersect,overlap,collapse,or be nested for z machining. This happens, it seems like, all the time.. Help
-
Thanks Thad
-
Hello All A lot of the time when I use pick window, for some reason, the window sticks to the upper left hand corner of the screen. I hit the esc key to stop it, and start again But sometime it takes about four time of esc Before it works like it should. Bug???