Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi Looking for mastercam file picture of engineer preferable with cigarette in mouth.
Reason old boy in machine shop is retiring and they want me to program a quartz Glass Disc engrave with his name and a funny picture.
Any help or ideas very much appreciated.
files would need to be V9 (poor me still with version 9 )
All the best JimP Scotland
I am using Win DNC V4.0 to sen dfiles to a Sauer CNC mill every thing has worked ok for the last few years but now has just stopped viewing the files on the CNC and more inportant I can not download from PC to CNC (As you have most likley guessed all our programs are kept in the PC.
Any one come acroos this prob I have checked cable and plugs they seem good.
I think the software is seeing the M/c but not the programs?
hope someone can help.
ATB JimP
Go to your settings>>configuration. At the bottom of your system configuration screen it says current. If you change this it prompts you (do you wish to scale the current part) say yes and all is done.
I would make a copy of the file before doing this. I just did it on a simple part and it worked great.
Hi I am trying to machine a barrel cam using Rolldie, but when I insert the diameter it only machines the OD how do I change it to machine ID?
Regards JimP Scotland
V9
Hi I have been asked to supply a 3D drawing and machine this part for a customer, using Solid works 2007 & Mastercam for the programming V9.
Problem for me drawing supplied by customer is a rolled out view, as if the tube has been rolled flat, question how do I convert this view into a solidworks or Materscam part.
I can send Acrobat copy of the projected drawing tried to send to Cadcam FTP site but was not allowed.
Thanks once again JimP Scotland
Hi I have been asked to supply a 3D drawing and machine this part for a customer, using Solid works 2007 & Mastercam for the programming V9.
Problem for me drawing supplied by customer is a rolled out view, as if the tube has been rolled flat, question how do I convert this view into a solidworks or Materscam part.
I can email Acrobat copy of the projected drawing tried to send to Cadcam FTP site but was not allowed.
Thanks once again JimP Scotland
V9 Serial 73249-1
Buying a new laptop will Mastercam 9 run on Microsoft Vista?
As all the new laptops seem to come supplied with microsoft Vista except Dell and I am not to keen on there computers had a lot of problems in the past.
Thanks once again for your help.
Jim
Hi Hope you can help When I go to configure to change my setting I get this error message about 4 times - message 436 -(Configuration Text) not found
message 437
message 438
message 439
Thanks in advance JimP
Hi all I am looking for a Air Turbine Spindle to fit on our CNC Mill BT40 fitting there seems to be a few good one around but my problem is we drill small holes in Quartz 0.025" and need to have through coolant. Does anybody know where I could source one.
Thanks in advance Jim from Bonnie Scotland
PS this is still the best forum in the world.
I am buying a new Dell computer was going to order 256MB NVIDIA FX3400 Quadro video card but can only find 256MB NVIDIA FX3400 (HEGA) on their site are both cards the same?
Thanks again Jim
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.