there is a ! in front of my program get error code poss corrupt program deleate all programs and reload it wont let me deleat any programs or do anything dont know how ! got there or how to get ride of it thanks in advance if you guys know what this could be

yes it was from in house and thank you i will contact him

good afternoon gentelmen just a quick question. a couple of years ago we purchesed the set up sheets My hard drive got smoked was wondering who would i contact to try and get replaced

yes have tried a couple same error

tryied that but still no go looks like time to call my reseller tech support

also i can see the assembly in the preview window

cannot find parasolid data in solid works file but when i open file all me assembly ops show up but when i try to open get the error message

how come i can open a sldprt but cannot open a solid sldasm do i need a differant converter running x2 mr1

Id like to know also

that has happened a couple of times with me also what you have to watch is that when you change size on insert you have to make sure size on holder width is a tad smaller than the size of insert or it will go back to what it was also if you dont get a message "changing this tool will update your operations " and hit ok it will not change

ok for lathe on V9 i just draw half from center line up for tool path now on X2 how do i get it to analyse my lines at dia instead of just fron center line up ex if dia is 2. it cheks 1. and i need to double answer

thank you gentelmen

how do i stop X2 from putting a point at center point of every rad i put in for lathe

arctype is set to "2" but still no go i guess i will just edit until i can call my tech support at the reseller thanks guys

using v9 haas post when i post everything comes out right except my "I" move is reversed + number comes out - and - numbers come out + where can i change this in my post go2 and go3 and k values are correct

ok i will try not to make this to long what i need to do is is this all our lathes have the x from center line up is in the - direction this is so wrong but it has been this way for the past 7 years now we have a new haas lathe and i need to make a post for this as i said all my x moves are in - direction so this also changes my i and k and go3 and go2 i have changed my x so above center line is now in + direction but dont now how or where to change my g02 g03 so they are right using V9 mpfan post i would like to change this my self and learn how to do this i have made a copy of the post to play with so as not to screw myself. any help would be appreacited

i think im missing something here .500 e/m finish at .400

just got a new computer now have v9.1 all updated and up to speed . now if i load x will i still ba able to use 9 while i screw around with x to get used to the new stuff

we have a 10t Fanuc controller on our lathe and you are right not a whole lot of memory we only run one program at a time and if it is a big program we remove all block numbers and spaces and if it is still to big we drip feed from dnc system only problem with drip feed you cant jump around program very easy if you have to recut a tool

have not got x yet but dave and busters is in my back yard would like to attend how do you get an invite

Its time to up grade at level 1 right now got the go ahead for leveal 3 was wonderind if any of you have used solid cam and if so is it any good boss wants me to look into it before we decide for sure i know you will be a little bias as thias is a mastercam forum but any info would be helpful

i agree with chris sems like an easy enough part do it in 2d should be no problem

try adding more stock to lead in and make sure extend counture to stock is checked

what do you mean ignore stock boundries does it look like it crashes

after loading new hard drive windows xp mc and everything else now i cant seem to get into the ftp site is it down or is it this computer im about to trash it been down three days getting to far behind to screw with it any suggestions would be welcom