Jeff2005
-
Posts
462 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Jeff2005
-
This is easily taken care of with your total tolerance setting (cut tolerance). I run mine tight and I get a better finish.
-
I am sorry about asking about the price of the post. I forget that very important information. thank you for reminding me.
-
Does IN-House Solutions create or modify a post if you need them to and what is the cost if they do? And also if I were wanting a customizable setup sheet can they make you one as well? Thanks for any input that you can give me. It is always apreciated. Jeff Mastercam Mill level 3 and solids Mastercam X SP1 mill level 3 and solids
-
This may have already been covered. In 9 I had the option of clicking the question mark and dragging it to what I wanted to know, about the button I was working with, and it would give me a brief description of that button. Will that be added in X in the future? Thanks for the help as always.
-
I having a problem after I installed X, when I went back to 9 to use the Autodesk converter Write file and Write dir was not there I have read but no write does anyone have an idea on this problem.? thanks in advanced. Jeff
-
I am not even seeing the write option only the read file and read dir.
-
I am missing the write button to save out as a DXF file, it just stopped working what do you think happened to this button it has been there all the other times. THANKS IN ADVANCED.
-
I tried that and it didn't work. When I regen it keeps giving me that same error. I have the V9.1MR0105 version already installed what do I do if I reinstall it. Thanks again,
-
I am getting an error message, after I have changed the shape on a part, I re-selected my drive surfaces and tried to regenerate my programs and for some reason it gives me a warning saying that,Fast ZCUT technology is not properly installed. Does anyone have an idea what this might be? Thanks in advanced.
-
I have got it running no problems so far.
-
Can I just take out Hasp3 then plug the HASP4 in? Will everything work fine? Thanks, Jeff
-
Yes I understand that's what people are telling me but I am new with all the updates, and the previous programmer we had, didn't really care if we upgraded or not. Now I am trying to scramble around and take care of it as soon as I can. I was only trying to get an idea of what kind of wait I was looking at.
-
We have a draft Version of 9 we bought for another computer just to do drawings or to look at drawings. Does anyone know if there is a draftX version? Thanks.
-
It has been a week since I have requested my HASP4. Would anyone know an answer to this question.
-
Is this used seperate from your mouse or in place of your mouse?
-
Cut tolerance is where it's at.
-
We have machined STL files but we used revquick to clean them up.
-
New PointCloud chook for Mastercam
Jeff2005 replied to Verisurf - Ernie Husted's topic in Industrial Forum
Can someone send it to me I would like to try it. I am a Geomagic user and would like to compare the difference. [email protected] thanks -
Thanks that worked. Some reason he sent it to me with a ZAP extension because my email wouldn't let it through. I do know about ZIP files.
-
Subject doesnt' make sense, does it. This will be my first X question, my reseller sent me a file HASPX.EXE from a zip file, the zip file didn't run then he sent it to me as a zap file and said to rename the file, it still didn't work. Anyone know what I did wrong or what to do about it.?
-
I don't see the option filter planer chainset when I am selecting solids.
-
This might be a stupid question I get this alot when I am in solids does anybody know what it means. Thanks in advanced.
-
yeah I now have the box for X but no codes yet. It only took six pages before I was able to say: I GOT X!
-
GUYS, I just received X today and am itching to install it, no codes though. I don't have any patiences.
-
Thanks I didn't realize it was brought up already.