Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I found V9 MR0105 The best of the DOS based versions by far.
X2 is faster at toolpathing, but it is marginal.
Dockable Toolbars make life alot easier and everything faster.
Maintenance I find is too high a price, but I still keep up to date.
I think if you asked the people that actually pay and play, they would tell you the same.
Maintenance costs should come down.
M2Cents.
Todd, John, Bogus.
I have the front buffer disabled.
Still I'm getting the pixels missing, like a hole in my drawing until refresh.
Grrrrr, I had this years ago.
Thought we were past this sort of thing.
Any other ideas?
Hello All,
I am running a Ge-Force 7600 GS on XP Pro. With Forceware Version 163.71
I just upgraded to this 256 card as opposed to my 128 card.
I am now having some screen issues with holes in the display upon zooming etc.
Can anyone tell me if there is a setting somewhere deep inside the cards software that I am not seeing?
I am running Two notches down on the accel.
TIA.
Hello All,
could someone paste a screen shot of a good backup scenario?
I don't want a bunch of backups in the part folder, cuz it makes it difficult to see what files are in there.
Thanks in Advance.
I'm using MR2 but this has happened before.
I get an error like the one in this picture but when I go into my machine def there are no noticable problems?
any ideas?
anyone know the username and password for FTP?
Thanks.
I configured mine so I have an end selection, green button, on mine, then it's right click, left click on green button. I also put it at the top of the right click menu, so it's right there.
If you configure your right click just as an enter, you lose all your right click options.
HTH.
Are you using solids or surfaces?
If you go into your parameters for Gap settings, uncheck the boxes for gouge checking, this will speed things up.
otherwise, make sure all your parameters are correct and go for lunch.
It'll be done when you get back.
You could cut your part up and toolpath individual peices.
HTH.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.