Lee.
-
Posts
1,183 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Lee.
-
I don't think you can select only the comments to be not numbered? either all or nothing, i'm pretty sure.
-
Kyle, was it brand new? so it actually comes ready for mastercam?
-
Active window changing with dual monitors
Lee. replied to Jacob Featherstone's topic in Industrial Forum
Can't say it's happened to me. are you sure you are not accidently clicking somewhere? -
Under Files in the Control Def, there is a section for Posting error file, make your changes there. HTH
-
Just a note. What I find easier is to convert the surfaces to solid sheets and then trim those. Then create surface from solid and delete solid sheet.
-
Henk, I increased my filter tol to 0.05 and the little lines went away. Does this help?
-
Henk, I see what you mean. I don't like this either. Not as smooth. Maybe we are missing something?
-
Jim, check your mail, I hope this helps. Lee.
-
Henk, Have you checked to make sure your arc filter is turned on?
-
No, It's called Ref Point on the Tool Page of your parameters, check it and then input what positions you need for both Approach and Retract.
-
Well, If you know it would work, why don't you compare the two posts in the are of output for rapids or linear moves? and I thought you wanted something fixed.
-
Try posting out with a virgin MPMASTER and lets see what that gives you.
-
Go into your control deff. Look under linear moves and check off in there what you want to happen. Let me know how you make out.
-
Kyle, Is there? Does it come with the Space Pilot? I am really interested in getting one of these, but just not too sure how it works is all.
-
Check to see if there are any untrimmed surfaces.
-
Solids is the way to go. Back in V9 I had a problem machining solids, but not anymore. I don't use surfaces anymore, unless I use them to create a solid sheet to trim to, thats all.
-
Thanks Guys. I did delete my config and that worked also. However when I check the fix this morning, deleted new config, restored old config and reset colours, much better. Now I have all my own settings, wow. Thanks again.
-
Do you mean delete the old one? I thought about doing that but wanted to see if there was a better way.
-
Hello All, In an attempt to help someone, I got to fooling with the C-Hook V7 Colors. Now I can't get it back to X2 Colors. Ideas?
-
+1000 to Shawn. I run my own company and have to be very careful where the dollars get spent. Having said that as soon as I'm able I'm getting a Space Pilot. Thanks John, Lee.
-
John, Could you explain what you mean by your last statement. Thanks, Lee.
-
We need to know what version you are running first.
-
Tyler, Only glad to help. Cheers.
-
Tyler, I don't think so. He said he's getting Herky Jerky motion. I would think this has to do with the machine. He also says, Chord length, this is why I think he's talking about a bunch of straight line cuts instead of smooth arcs using filter set up properly. It could be he's maching something that is more spline like in profile, then he will be hard pressed to get smooth travel. Lee.
-
Thanks John.