Does anyone have any experience machining Turcite? We are going to be turning a very simple spacer made from this material and it's new to us. Coolant, no coolant, etc....

Shouldn't cause any problems for you I don't think. I always do comparison's between versions just to make sure the post is working the way you expect it too with the newer software. Sometimes when updating the post files, things can change and the resulting code can cause issues. So I have a folder with some files I use and I'll post them out in both versions and then do a comparison. If everything looks good then it should be safe to uninstall the previous version.

Ok thanks Kenneth.

Kenneth, I was hoping that MU2 might fix the above mentioned issue but it hasn't. When can I expect a fix for this? This is very disappointing being that it was brought to CNC's attention back in December.

Thanks for looking at it Kenneth.

Kenneth, I have sent a zip2go file to the above mentioned email. Thank you.

I've noticed an issue with verify and live tooling on the sub spindle. I'm drilling some face holes and the first hole is fine but after that the tool wants to come thru the back of the part. If I make separate operations for each hole then all is good. I've been told this is a plane issue. Does anyone know when this issue may get fixed? It was never a problem with previous versions.

I while ago I created a custom drill cycle that works for this problem. The problem with the G83 is that yes it will start inside the hole but it's going to rapid into the hole to the "R" position. By creating a custom drill cycle you can work around this.

Hi Mick, My company is looking to purchase a Mazak Integrex or a Multus. As of today we are leaning towards the Multus. Can you give me some feedback on the machine? Was there a specific reason you guys went with Okuma? Any info would be great we need to make a decision in the next week or so. Thanks Jack

OK thanks.

My place is looking to get an Integrex next year. Can I ask you what does he use to program it?

Ok thanks. As far as showing chucks, stock, spindles and B axis using gcode the machine software will show all of that no problem then yes? Does it show just wireframe or is it actually a 3d representation?

To the guys who have an Integrex. What kind of verification software are you using? I know that the Mazak has 3D virtual machining software but does that only work when programing using Mazatrol? If I program g code how much detail will we see at the machine when we run the simulation? We were hoping to use Mastercam for everything but right now I'm not positive that Mastercam can thoroughly verify a machine like the Integrex. And the machine simulation doesn’t seem to support mill/turn type of machines at this time. Okuma however offers collision avoidance software for the pc that is free and it’s the same software that runs on the Multus machine and it shows everything and this is becoming a big factor for us in determining which machine to purchase either the Mazak Integrex or the Okuma Multus. Any insight would be very much appreciated.

Thanks man.

Daniel thanks for the info. We have no intention of using anything but Mastercam. We have had a Hardinge Q65 which has 2 spindles and does live tooling for years and mastercam does a great job with that machine. My question was more of a machine one as far as issues with spindles and whatnot. Thanks. Jack

My company is getting an Integrex i400 early next year we will be using Mastercam. Can I ask if you have had any issues with your machines? We were also looking at the Okuma Multus but are now leaning towards Mazak. Thanks.

As far as a custom tool is concerned it is very easy to do. You can open up an MCX-6 file of one the tools already installed in X6 ( tool files are in the mill folder ) to see where the origin wants to be and how to define your tool then simply draw your own tool and save the file. Then from the tool manager create a new tool and select undefined as the tool type. Select custom file for the profile. On the parameters page use the select button to select the file you created that represents the desired tool geometry. You could also from any file that you are working on draw the geometry on a level and select that level to define you tool. You can look on the install dvd for any what's new details. Hope this is helpful.

Ok thanks good to know.

Not picking the bottom of the line was my problem thanks. I did try one of the default mill/turn machines and can't say if their is missing something but I think I'm on the right track now. Thanks again.

Would I need to add an axis of some kind to my mach def file for my mill/turn to support drilling on a angle? I've been playing around trying to drill on an angle and when I backplot, the tool is oriented in reverse. Something is wrong with my toolplane I'm guessing. I created a new plane using planes by normal. We may still get the multia axis option I'm just trying to figure it out a little beforehand. Thanks for the help.

My company is looking at purchasing a Mazak Integrex next year. Can someone tell me if I would need the mutli-axis option for Mastercam if I was only drilling some angled holes on the face of a part? We already have a mill/turn lathe and are familiar with live tooling but have never drilled on an angle before. Any advice would be appreciated. Thanks

Well.....I installed MU1 and figured out that a few of my tool libraries were corrupted. So I created new ones and copied the tools I needed and now adding new tools is not a problem.

Can someone tell me if it is possible to add tools to the library in X5MU1? I'm running X5 and it's really pissing me off that I can't add tools in Lathe or Mill. Sorry if this was posted before. I've heard they plan on updating the library in version 6.

For anyone interested I use the Entity Attributes Manager when using lathe and assign all points to one level. I never have that level visible so it's not an issue.

I'm not using a sub program, however when I post a program that has drill operations, along with the NC file I also get a .SUB file with the following code N20 M99 in it and nothing else. I have many different posts and have compared them to this Fadal post and can't find any reason for this. Any help would great.