Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Trying a new moldbase DMS usually we use DME moldbases.
They are aound 75% or so lower priced. Anyone else use them or maybe even make them.
The base came in alright, but is a little stained from the oil they coat them with to keep from rusting. So far that is the only complaint, just doesn't look good with stains for a new base.
logo.jpg sounds right
Right mouse click on the logo, in the set-up sheet and pick properties, it should tell you the name and where it is located. Then replace with your new logo using the same name using windows explorer.
HTH
Type in Level "Number:"
hit the Tab key
Type in the "Name:" for the level
hit the Tab key
Type in the "Level Set:"
hit the Enter Key
Everything looks fine
Then
shut off your Level Manager
Then
Turn back on and everything is there, but the "Level Set:" info
I have tried this on 2 different seats here they both repeat the same error.
Ron spaces can be a problem i agree.
My problem is I type in a message and hit enter on the key board it shows up in the layer Level Set box.
Then shut off the Level Manager and turn it back on and what you typed in is not there anymore.
The only way I can get it to stick is double click in the Level set box on the layer you want.
It used to work in both places B4.
Hope this makes sence.
Anyone been having trouble with the "Level Set" remembering what you type into it?????
If I type in the lower left box it doesn't remember what you type.
If you double click in the "Level Set" box in the level you want it remembers what you type.
I have never had a problem with this until X2 MR2 SP1
I have done a search and found nothing so far on this.
quote:
i tried my way again and it didn't work. i must have changed something along the way. Hacsta.......our Designer tried on his computer and it didn't work, so he merged my fix on my computer back into the drawing.
I tried your way and it didn't work here.....not a 100% fix I guess.
A LITTLE buggy if you ask me.....
quote:
I did solve this for him, but trimming this should be easier than the work around I did. I added a .0001 fillet, blew the fillet away and trimmed.
Shouldn't be this much work though.......
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.