Just lookin back............got your problem fixed yet????? if not try Check your control definition under Tool and set it to "add to tool", length 0, diameter 0 also use: Tool numbers sequentially HTH

Had trouble when I 1st started with X3........... worked on some settings..............no problem since.

Now back on topic Seat time Didn't have time to learn.......just sat down and did it.......had a mold to build.....learned as I created the mold design then started creating programs. It was a challenge and I made it fun......that was back in the ge3 days. Soak up as much info as you can from this forum.......you might have to read thru a few off topic things.......but a few laughs neva hurt anyone.........just ignore the Iowa jokes. If I remember right James answered my 1st question on this fine forum......... Thanks James Off topic James.........your usc nonstarter quarterback for the Patriots needs to step it up a little and get me more points.......he has this week off to work on a few things.

quote: Pete Carroll says "Always Compete", I say "Always Learn". You'll always be competitive that way. [big Grin] Just had to get a usc thing in there didn't ya James............ 15 yard penalty no make that 25.... and loss of down. off topic penalty

You didn't get a t-shirt in yours??????

Cliff notes

quote: Im still So confused. I think I could have just drawn a stocking by now hahah! You have plenty of time til Xmas..........it's only.....................Sept 17.......... Welcome to the furum

Use all the time as stated above Fast way to organize your levels so you can turn them on and off as needed.

quote: Midwest, that's funny. I was being serious!

Anyone have a video on how to get to the HELP section?????

Good 1 to start with

Who's ready for some football??????????? Happy un-Birthday

Happy UnBirthday Chippy

quote: I offset the pockets .002 Sounds like you should be using Wear........I think you would like.........no need to offset your pockets.

contour ramp used a lot with wear also

"." Thad using an old trick........ Pretty good for a Meechigan guy........

quote: That's the good thing about having 16 of them, I was able to get the larger sizes as I kept getting larger I think I have 2......... Brown nose

All from 'IOWA' will be shipped a Mastercam T-Shirt and mouse pad for having posted over 10 messages. Thanks 'Iowa' for your participation!

In again..........in Iowa

Not working now...........

IN web page linky

Look @ top of the page.......... Or click here

How about this........ on our &*%$# Hurco the main power switch on the back Red is ON and Green is Off